Just downloaded the BLML2HS plugin (have not registered yet).
Running the following versions:
HS3 Pro 3.0.0.163
BLML2HS 2.0.16.0
ML Server 4.0.5611.15771
BLML2HS For MLServer 4.0.4.0
Running HS3 on 192.168.1.21 and ML4 on 192.168.1.22, both are Win 7 Prof 32bit machines with no firewall or antivirus.
I have set up in HS like this:
Server IP Address 192.168.1.21
Server port number 95
and on ML like this:
Server 192.168.1.21
Port 95
Both ends always read disconnected...
I have enabled debugging on the ML side and this is what the log reads:
15/05/15 17:41:39 : v4.0.4.0 - **************** Debug Logging ENABLED at 15/05/15 17:41:39 ****************
15/05/15 17:41:41 : v4.0.4.0 - Connect_To_Server() started
15/05/15 17:41:41 : v4.0.4.0 - Connect_To_Server(): theServer --> 192.168.1.21
15/05/15 17:41:41 : v4.0.4.0 - Connect_To_Server(): thePort --> 95
15/05/15 17:41:41 : v4.0.4.0 - Connect_To_Server(): userStarted --> True
15/05/15 17:42:02 : v4.0.4.0 - Connect_To_Server() finished
No error anywhere. Also checked the HS log and no error there either...
I am at a loss!
Cheers
Sandro
Running the following versions:
HS3 Pro 3.0.0.163
BLML2HS 2.0.16.0
ML Server 4.0.5611.15771
BLML2HS For MLServer 4.0.4.0
Running HS3 on 192.168.1.21 and ML4 on 192.168.1.22, both are Win 7 Prof 32bit machines with no firewall or antivirus.
I have set up in HS like this:
Server IP Address 192.168.1.21
Server port number 95
and on ML like this:
Server 192.168.1.21
Port 95
Both ends always read disconnected...
I have enabled debugging on the ML side and this is what the log reads:
15/05/15 17:41:39 : v4.0.4.0 - **************** Debug Logging ENABLED at 15/05/15 17:41:39 ****************
15/05/15 17:41:41 : v4.0.4.0 - Connect_To_Server() started
15/05/15 17:41:41 : v4.0.4.0 - Connect_To_Server(): theServer --> 192.168.1.21
15/05/15 17:41:41 : v4.0.4.0 - Connect_To_Server(): thePort --> 95
15/05/15 17:41:41 : v4.0.4.0 - Connect_To_Server(): userStarted --> True
15/05/15 17:42:02 : v4.0.4.0 - Connect_To_Server() finished
No error anywhere. Also checked the HS log and no error there either...
I am at a loss!
Cheers
Sandro
Comment