I am trying to change for 2 z-trollers to 2 Z-nets. I get the first one configured and the network restored to it ok, but get different errors adding the 2nd z-net.
Issue summary, details below. When I choose "Make this interface an Inclusion Controller" on the 2md z-net I get 1 of 3 errors;
-Error - Replicate Send Failed reported by controller
-Error reported in the Replication Send response object - Replication Send failed.
-Error, the Replication Receive response object is null without reporting a normal ending - Replication Receive failed.
The first time I tried
"Make this interface an Inclusion Controller" I would just get an error, "Error - The SUC/SIS interface on the destination network with HomeID 003D3206 could not be found"
So then I restored the network from backup to the 2nd z-net and it created it with the same node id 1 as the main house, even though it has 5 in the backup file. So then I chose erase network, and that created all kinds of problems.
then I edited the backup and deleted all the nodes and changed the home id, and that worked, but of course some of my devices were messed up from the erase.
So I reverted this pc back to a snap shot I created before I began, so back to a clean start, other than the z-net's not having a clean configuration.
Since then, I removed the 2 z-trollers, adding the first main z-net interface, and optimized. It still had the network from the previous restore.
Now when I add the 2nd z-net, it shows the new home id I created and non nodes. When I try to
"Make this interface an Inclusion Controller"
I always get errors.
1st
Replicate Receive started...
Replication in progress, please wait...
Replicate Send started...
Error - Replicate Send Failed reported by controller - you may try again. A "Restart" has been done on your controller.
Replication in progress, please wait...
Dec-22 6:16:35 PM Z-Wave Error Error reported in the Replication Send response object - Replication Send failed.
3nd
Replicate Receive started...
Replication in progress, please wait...
Replicate Send started...
Error reported in the Replication Send response object - Replication Send failed.
Error: Error reported in the Replication Send response object - Replication Send failed.
Dec-22 7:07:40 PM Z-Wave Error Error reported in the Replication Send response object - Replication Send failed.
3rd try
Replicate Send started...
Error - Replicate Send Failed reported by controller - you may try again. A "Restart" has been done on your controller.
Error, the Replication Receive response object is null without reporting a normal ending - Replication Receive failed.
Error: Error, the Replication Receive response object is null without reporting a normal ending - Replication Receive failed.
Dec-22 7:09:27 PM Z-Wave Error Error, the Replication Receive response object is null without reporting a normal ending - Replication Receive failed.
hs3 3.0.0.206
zwave 3.0.1.54
I thought this would be an easy switch over, but it's not going well. Anyone have any ideas how I can get this working?
Issue summary, details below. When I choose "Make this interface an Inclusion Controller" on the 2md z-net I get 1 of 3 errors;
-Error - Replicate Send Failed reported by controller
-Error reported in the Replication Send response object - Replication Send failed.
-Error, the Replication Receive response object is null without reporting a normal ending - Replication Receive failed.
The first time I tried
"Make this interface an Inclusion Controller" I would just get an error, "Error - The SUC/SIS interface on the destination network with HomeID 003D3206 could not be found"
So then I restored the network from backup to the 2nd z-net and it created it with the same node id 1 as the main house, even though it has 5 in the backup file. So then I chose erase network, and that created all kinds of problems.
then I edited the backup and deleted all the nodes and changed the home id, and that worked, but of course some of my devices were messed up from the erase.
So I reverted this pc back to a snap shot I created before I began, so back to a clean start, other than the z-net's not having a clean configuration.
Since then, I removed the 2 z-trollers, adding the first main z-net interface, and optimized. It still had the network from the previous restore.
Now when I add the 2nd z-net, it shows the new home id I created and non nodes. When I try to
"Make this interface an Inclusion Controller"
I always get errors.
1st
Replicate Receive started...
Replication in progress, please wait...
Replicate Send started...
Error - Replicate Send Failed reported by controller - you may try again. A "Restart" has been done on your controller.
Replication in progress, please wait...
Dec-22 6:16:35 PM Z-Wave Error Error reported in the Replication Send response object - Replication Send failed.
3nd
Replicate Receive started...
Replication in progress, please wait...
Replicate Send started...
Error reported in the Replication Send response object - Replication Send failed.
Error: Error reported in the Replication Send response object - Replication Send failed.
Dec-22 7:07:40 PM Z-Wave Error Error reported in the Replication Send response object - Replication Send failed.
3rd try
Replicate Send started...
Error - Replicate Send Failed reported by controller - you may try again. A "Restart" has been done on your controller.
Error, the Replication Receive response object is null without reporting a normal ending - Replication Receive failed.
Error: Error, the Replication Receive response object is null without reporting a normal ending - Replication Receive failed.
Dec-22 7:09:27 PM Z-Wave Error Error, the Replication Receive response object is null without reporting a normal ending - Replication Receive failed.
hs3 3.0.0.206
zwave 3.0.1.54
I thought this would be an easy switch over, but it's not going well. Anyone have any ideas how I can get this working?
Comment