I have just upgraded to HS2.0.2040 a few days ago and everything in Ocelot and SECU land worked fine until i came home from work today. I have 8 internal dorrs that use magnetic contacts wired to the SECU-16 as I/O points. When a door is opened it triggres an event that sounds off an alert so we know if the kids are into something they shouldn't be. All of the sudden the doors are not working now. I researched this and found that the plugin in reference for ADIOcelot was not correct so I toggled that and reboot both of the controllers and the HS Server. This seemed to work fine on my initial testing but upon using the same door a few minutes later no signal was sent. Looking at the status in HS it isn't updated even after a refresh and if I reboot again -- all is well for the first event again and then the functionality goes away.
Any ideas?
This setup worked for almost a year under 1.7 with no issues at all and has worked for the last 2 1/2 days with no trouble and just went nuts.
No other system changes have taken place since the upgrade and everything else appears to be A OK.
The ADIOcelot process is running also so I am a bit stumped.
Any ideas?
This setup worked for almost a year under 1.7 with no issues at all and has worked for the last 2 1/2 days with no trouble and just went nuts.
No other system changes have taken place since the upgrade and everything else appears to be A OK.
The ADIOcelot process is running also so I am a bit stumped.
Comment