Announcement

Collapse
No announcement yet.

Lost the "off" button

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Lost the "off" button

    Suddenly today the GUI button "Off" is gone. I can turn a Z-wave device on, but the off button is missing.

    The device is "Z-Wave Switch Binary"

    It is a Leviton appliance module.

    How can it have a "On" button but no "Off" button?

    #2
    Resolved

    I bought a second Z-Wave relay module and it work properly.

    The problem seems to be the Z-Wave relay (Appliance module) not the controller. The Appliance Module (< 1 week of use) seems to have failed and the way the Z-wave ecosystem works it seems the HomeSeer GUI just shows it with an ON but no OFF button.

    I just started the conversion from X-10 to ZWave so I just have the one device.

    I sure home these things do not all fail so quickly.

    The failed device is a LEVITON VRPA1.

    Comment


      #3
      Originally posted by David Akers View Post
      I bought a second Z-Wave relay module and it work properly.

      The problem seems to be the Z-Wave relay (Appliance module) not the controller. The Appliance Module (< 1 week of use) seems to have failed and the way the Z-wave ecosystem works it seems the HomeSeer GUI just shows it with an ON but no OFF button.

      I just started the conversion from X-10 to ZWave so I just have the one device.

      I sure home these things do not all fail so quickly.

      The failed device is a LEVITON VRPA1.
      This should be fixable. Can you post a screen-shot of the Status-Graphics tab of the "bad" device? You an compare it to the tab of the good device and likely manually recreate it.

      Cheers
      Al
      HS 4.2.8.0: 2134 Devices 1252 Events
      Z-Wave 3.0.10.0: 133 Nodes on one Z-Net

      Comment

      Working...
      X