Announcement

Collapse
No announcement yet.

HS3 Vista Alarm plugin v3.0.0.40 Beta (for Windows & Linux)

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #61
    Originally posted by mnsandler View Post
    the plugin processes the hex data in the middle of the msg [f70000008020038c08000000000000], it doesn't look at the alpha text.

    sample message:


    Each alarm mode behaves differently and activates different bits at different times.
    Gotcha. So is there no way to change this then?

    Comment


      #62
      Originally posted by aaron View Post
      Gotcha. So is there no way to change this then?
      I have a 20se that doesn't send count down msgs so the status changes on the first message.

      you might be able to change the count down (exit delay) or other options in your panel programming for arm-stay or arm-instant, but not exactly sure.
      Mark

      HS3 Pro 4.2.19.5
      Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
      Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
      Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

      Comment


        #63
        Originally posted by mnsandler View Post
        I have a 20se that doesn't send count down msgs so the status changes on the first message.

        you might be able to change the count down (exit delay) or other options in your panel programming for arm-stay or arm-instant, but not exactly sure.
        I guess I'm confused

        Both Arm-Stay and Arm-Away count down 45 seconds on my panel...

        When I use "Arm-Away", the device changes to "Armed" status in HomeSeer within 1-2 seconds after hitting the button... So when there is still 43 seconds on the panel left...

        When I use "Arm-Stay", the the device doesn't change to "Armed" until AFTER the count down has completed...

        So, my question is why? Why wouldn't they both switch the status in HomeSeer right away?

        Comment


          #64
          Please post the first panel msg received after you activate each mode and I will point out in the details why of the msg.
          Mark

          HS3 Pro 4.2.19.5
          Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
          Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
          Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

          Comment


            #65
            Originally posted by mnsandler View Post
            Please post the first panel msg received after you activate each mode and I will point out in the details why of the msg.
            Here you go...

            Arm-Away (Instant changed in HomeSeer)
            Apr-18 4:32:07 AM Vista Alarm Setting System to Armed Away
            Apr-18 4:32:07 AM Vista Alarm MessageKey=ARMED ***AWAY***May Exit Now 43 1
            Apr-18 4:32:07 AM Vista Alarm Processing msg on Partition 1
            Apr-18 4:32:07 AM Vista Alarm [0101050110000000----],043,[f7000087104305002c020000000000],"ARMED ***AWAY***May Exit Now 43"
            Apr-18 4:32:06 AM Vista Alarm Setting System to Armed Away
            Apr-18 4:32:06 AM Vista Alarm MessageKey=ARMED ***AWAY***May Exit Now 44 1
            Apr-18 4:32:06 AM Vista Alarm Processing msg on Partition 1
            Apr-18 4:32:06 AM Vista Alarm [0101050110000000----],044,[f7000087104405002c020000000000],"ARMED ***AWAY***May Exit Now 44"
            Apr-18 4:32:05 AM Vista Alarm Setting System to Armed Away
            Apr-18 4:32:05 AM Vista Alarm MessageKey=ARMED ***AWAY***May Exit Now 45 1
            Apr-18 4:32:05 AM Vista Alarm Processing msg on Partition 1
            Apr-18 4:32:05 AM Vista Alarm [0101050110000000----],045,[f7000087104505002c020000000000],"ARMED ***AWAY***May Exit Now 45"
            Apr-18 4:32:05 AM Vista Alarm Setting Partition 1 to Armed Away
            Apr-18 4:32:05 AM Vista Alarm !Sending.done
            Apr-18 4:32:05 AM Vista Alarm Sending
            Code:
            +2
            Apr-18 4:31:58 AM	 	Vista Alarm	Setting System to Disarmed-Ready
            Arm-Stay (Never changed in this log view.. Only changed once count down completes)
            [CODE]
            Apr-18 4:33:46 AM Vista Alarm MessageKey=ARMED ***STAY***May Exit Now 43 1
            Apr-18 4:33:46 AM Vista Alarm Processing msg on Partition 1
            Apr-18 4:33:46 AM Vista Alarm [0011000110000000----],043,[f70000871043008028020000000000],"ARMED ***STAY***May Exit Now 43"
            Apr-18 4:33:45 AM Vista Alarm MessageKey=ARMED ***STAY***May Exit Now 44 1
            Apr-18 4:33:45 AM Vista Alarm Processing msg on Partition 1
            Apr-18 4:33:45 AM Vista Alarm [0011000110000000----],044,[f70000871044008028020000000000],"ARMED ***STAY***May Exit Now 44"
            Apr-18 4:33:44 AM Vista Alarm MessageKey=ARMED ***STAY***May Exit Now 45 1
            Apr-18 4:33:44 AM Vista Alarm Processing msg on Partition 1
            Apr-18 4:33:44 AM Vista Alarm [0011030110000000----],045,[f70000871045038028020000000000],"ARMED ***STAY***May Exit Now 45"
            Apr-18 4:33:44 AM Vista Alarm Setting System to Disarmed-Ready
            Last edited by mnsandler; April 18, 2017, 07:50 AM.

            Comment


              #66
              Not sure why that didn't post correctly Sorry about that...

              Bottom line, you never see "Setting Partition 1 to Armed Stay" when you use the Armed-Stay function. I think this is the problem. But I'm not sure why we wouldn't see that since it really does it on the panel.

              Comment


                #67
                I believe the issue is related to your garage door (zone 16). the panel isn't reporting (no faults) and thus the plugin isn't responding as expected (ie setting the arm-stay status)
                Mark

                HS3 Pro 4.2.19.5
                Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
                Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
                Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

                Comment


                  #68
                  Originally posted by mnsandler View Post
                  I believe the issue is related to your garage door (zone 16). the panel isn't reporting (no faults) and thus the plugin isn't responding as expected (ie setting the arm-stay status)
                  I could see that if my Garage door was currently faulted, but it isn't.... System is in READY status....

                  And again, it works for Armed-Away, just not Armed-Stay.

                  So are you telling me on your system, if you click "Armed-Stay", your status changes within 1-2 seconds from clicking the button? It's just mine that doesn't?

                  Comment


                    #69
                    Originally posted by aaron View Post
                    So are you telling me on your system, if you click "Armed-Stay", your status changes within 1-2 seconds from clicking the button? It's just mine that doesn't?
                    yes, that is what i'm saying. I just retested by 20p.
                    Mark

                    HS3 Pro 4.2.19.5
                    Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
                    Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
                    Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

                    Comment


                      #70
                      I see with the new beta, that you have changed formatting on the last panel display message.

                      Personally I prefer having the spaces in there as it makes the message more intelligible and mimics the panel. Also I have many events that trigger based on certain messages and retooling these would be quite extensive.

                      Could you please add a configuration to either through the plugin configuration or manual INI modification to format keep the old way you displayed the last panel message?

                      Reverting this change or making an option to use the prior format would be greatly appreciated.

                      Comment


                        #71
                        Originally posted by skarragallagher View Post
                        I see with the new beta, that you have changed formatting on the last panel display message.

                        Personally I prefer having the spaces in there as it makes the message more intelligible and mimics the panel. Also I have many events that trigger based on certain messages and retooling these would be quite extensive.

                        Could you please add a configuration to either through the plugin configuration or manual INI modification to format keep the old way you displayed the last panel message?

                        Reverting this change or making an option to use the prior format would be greatly appreciated.
                        please confirm your triggers based on certain messages still work. I intended to only change the formatting for display purposes
                        Mark

                        HS3 Pro 4.2.19.5
                        Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
                        Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
                        Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

                        Comment


                          #72
                          That is half the issue though... Display. I will dig through my events and test though.

                          Sent from my XT1254 using Tapatalk

                          Comment


                            #73
                            I believe it is working I updated a while ago and this event fired off last time on 4/30. I will continue to test but that still leaves the display issue...

                            Sent from my XT1254 using Tapatalk

                            Comment


                              #74
                              Originally posted by mnsandler View Post
                              I have a 20se that doesn't send count down msgs so the status changes on the first message.

                              you might be able to change the count down (exit delay) or other options in your panel programming for arm-stay or arm-instant, but not exactly sure.
                              I can confirm the behavior reported by @aaron. Observed when setting up my system a year ago; never got around to reporting it.

                              Field *197 enables the countdown display. When this field is 0, the countdown isn't displayed and the System Status and Partition 1 Status devices change immediately upon arming (start of countdown). But when *197 is 1, for modes Armed-Stay, Night-Stay and Armed-Instant, both devices display "Disarmed-Ready" until the countdown expires. For Armed-Away and Armed-Maximum, the devices change state at the start of the countdown, just like when the field is zero.

                              I'd wager that you'll see the same if you set your *197 to 1...

                              Comment


                                #75
                                Originally posted by skarragallagher View Post
                                That is half the issue though... Display. I will dig through my events and test though.

                                Sent from my XT1254 using Tapatalk
                                i'm working on a settings to allow the user to choose either format.

                                is your concern with the display related to HS Touch and not the web ui?
                                Mark

                                HS3 Pro 4.2.19.5
                                Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
                                Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
                                Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

                                Comment

                                Working...
                                X