DESCRIPTION
This is a FritzBox Plug-in that utilize the TR064 interface for secure communications with your FritzBox. It does NOT require telnet access, a feature that is no longer supported by recent firmware versions
REQUIREMENTS
INSTALLATION
CONFIGURATION
After installation and starting the plug-in, go to the configuration page. They are seven tabs:
TROUBLESHOOTING
Make sure the IP address and credentials are properly configured to reach your FritzBox. Also, make sure the FritzBox is configured to allow communications with this plugin by following the "Installation" section above.
This is a FritzBox Plug-in that utilize the TR064 interface for secure communications with your FritzBox. It does NOT require telnet access, a feature that is no longer supported by recent firmware versions
REQUIREMENTS
- This plugin is for HS3 or HS3PRO. It works with both Windows and Linux versions
- .NET Framework 4.5 or later, or mono 4.x needs to be installed on your Homeseer machine
- A FRITZ!Box with TR064 interface (most, if not all recent models are supported)
INSTALLATION
- Enable "Home Network / Network / Network Settings / Access Settings In the Home Network"
- Enable the Call monitor by dailing #96*5* on a phone connected to your FritzBox.
CONFIGURATION
After installation and starting the plug-in, go to the configuration page. They are seven tabs:
- FritzBox: Enter the details on how this plugin can access your FritzBox.
- Call log: Enable or disable the call log, and configure the number of devices, and device string setup/translations.
- TAM: Enable or disable the answering machine function, and configure the number of devices, and device string setup/translations.
- WLAN: Enable or disable the Wireless functions.
- Translations: more translation options, used by the devices
- Debug: only enable when you are having issues.
- Support: How to get support and how to donate.
TROUBLESHOOTING
Make sure the IP address and credentials are properly configured to reach your FritzBox. Also, make sure the FritzBox is configured to allow communications with this plugin by following the "Installation" section above.
Comment