Announcement

Collapse
No announcement yet.

I don't get it!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    I don't get it!

    I went to the "HAI RC Thermostat" option in the HS web menu.
    Pressed "Heat" for SystemMode.

    SystemMode changed to "Heat" but the "Heating" device is still Off (just like my oil burner).

    The rest of options:
    Fan=Off
    CurrentTemp=9
    HeatSetpt=21
    FanMode=Auto
    Hold=Off
    OperatingStatus=Off

    After that I changed it to Hold=On and same thing.
    After that I changed again to Hold=Off and same thing.

    What I'm not understanding?

    Ah, I'm using a HAI RC-80

    #2
    I restarted HomeSeer and the System device changed to On and the OperatingStatus device to Heating.
    I chacked the log and I can't see anything but the changes I did while in the HS web interface.

    Comment


      #3
      Are you sure you set the rc80 correctly? I had to change the System options parameter at the rc80 to 5 it was set to 0 as default. 5 is manual changeover fan on with heat.
      You have to get into installer mode to do this just hit the prog key 3 times than the fan key. Have you setup the rc80 with installer mode? Its in the manual on how to do it.
      How old is your furnace? If it has 2 transformers you will need a relay to make it work.
      Also check your serial connection to the rc80.
      Last edited by ; January 28, 2005, 12:50 AM.

      Comment

      Working...
      X