TI103---strange errors? Anyone help?

[GaBoYnFla]

I got a ACT TI103 recently and a USB to Serial adapter. All was fine till I had to unplug the box to move it. Now I'm getting strange errors or mumbo jumbo....can anyone tell me what to do?

6/10/2009 6:38:58 PM Debug TI103 $<2800! DONDON2D#
6/10/2009 6:39:14 PM Debug TI103 Dequeue: $>28001D03D03 CB#
6/10/2009 6:39:14 PM Debug TI103 Dequeue: adr
6/10/2009 6:39:14 PM Debug TI103 Dequeue: $>28001DONDON 3F#
6/10/2009 6:39:14 PM Debug TI103 $<2800! D0312#
6/10/2009 6:39:14 PM Debug TI103 Dequeue: cmd2
6/10/2009 6:39:14 PM Debug TI103 $<2800! D0312#
6/10/2009 6:39:15 PM Debug TI103 $<2800! DONDON2D#
6/10/2009 6:39:25 PM Debug TI103 Dequeue: $>28001D03D03 CB#
6/10/2009 6:39:25 PM Debug TI103 Dequeue: adr
6/10/2009 6:39:25 PM Debug TI103 $<2800! D0312#
6/10/2009 6:39:25 PM Debug TI103 Dequeue: $>28001DONDON 3F#
6/10/2009 6:39:25 PM Debug TI103 Dequeue: cmd2
6/10/2009 6:39:25 PM Debug TI103 $<2800!D03F2#
6/10/2009 6:39:26 PM Debug TI103 $<2800! DON4C#
6/10/2009 6:39:26 PM Debug TI103 $<2800!DON2C#
6/10/2009 6:39:36 PM Debug TI103 Dequeue: $>28001D03D03 CB#
6/10/2009 6:39:36 PM Debug TI103 Dequeue: adr
6/10/2009 6:39:36 PM Debug TI103 Dequeue: $>28001DONDON 3F#
6/10/2009 6:39:36 PM Debug TI103 $<2800! D0312#
6/10/2009 6:39:36 PM Debug TI103 Dequeue: cmd2
6/10/2009 6:39:36 PM Debug TI103 $<2800!D03 DONF3#
6/10/2009 6:39:37 PM Debug TI103 $<2800!DON2C#
6/10/2009 6:39:48 PM Debug TI103 Dequeue: $>28001D03D03 CB#
6/10/2009 6:39:48 PM Debug TI103 Dequeue: adr
6/10/2009 6:39:48 PM Debug TI103 Dequeue: $>28001DONDON 3F#
6/10/2009 6:39:48 PM Debug TI103 Dequeue: cmd2
6/10/2009 6:39:48 PM Debug TI103 $<2800! D0312#
6/10/2009 6:39:49 PM Debug TI103 $<2800!D03 DONF3#
6/10/2009 6:39:49 PM Debug TI103 $<2800!DON2C#
6/10/2009 6:39:49 PM Debug TI103 Dequeue: $>28001D07D07 D3#
6/10/2009 6:39:49 PM Debug TI103 Dequeue: adr
6/10/2009 6:39:50 PM Debug TI103 $<2800! D0716#
6/10/2009 6:39:50 PM Debug TI103 Dequeue: $>28001DONDON 3F

[prnorton]

TI103 Strange Errors

I have a TI103, and it sounds like you may have some of the debugging boxes checked in the Config. Go to Setup --> Interfaces and click the Config button under the TI103. If any of the boxes are checked you will get these kinds of messages in your log. Is your TI103 working OK otherwise? When I first got mine it was assigned to COM5, but after unplugging it it switched to COM7. You might check to see if the COM port is correct in the Setup --> Interfaces screen.