NodeMCU pin reset

[drmcp]

is there any way to stop the pin reset sent to the NodeMCU every 2 min?

13/2/2018 ,18:06:51.159 Sent to IP:192.168.0.39 Port No:8903 = 4 X ,Pin Reset Command

13/2/2018 ,18:08:32.192 Sent to IP:192.168.0.39 Port No:8903 = 4 X ,Pin Reset Command
13/2/2018 ,18:10:13.136 Sent to IP:192.168.0.39 Port No:8903 = 4 X ,Pin Reset Command

[drmcp]

had to delete boards

I had to delete all 4 boards i had config and re-add this one load the new sketch as board 1 and only board to get it to stop resetting.