If you attempt to register your Zee with an earlier version after the trial has run out, you will not be able to access the web interface. Use the procedure below to update to 3.0.0.83 and regain access to the web interface:
This procedure will update your Zee to version .83. If a later version is available, you can substitute that version number for the .83 in the instructions below.
This procedure can be used to update a Zee, Zee S2, or SEL to a different version of HomeSeer, say an older version or a Beta version, all you need is the version number.
Note: You should shut down the HomeSeer application first from within HomeSeer, Tools menu, to avoid possibly corrupting data.
Windows Users
Mac Users
All Users
Be sure to check periodically for updates by navigating to the “Setup” screen of your HomeTroller Zee.
[/FONT][/SIZE]
This procedure will update your Zee to version .83. If a later version is available, you can substitute that version number for the .83 in the instructions below.
This procedure can be used to update a Zee, Zee S2, or SEL to a different version of HomeSeer, say an older version or a Beta version, all you need is the version number.
Note: You should shut down the HomeSeer application first from within HomeSeer, Tools menu, to avoid possibly corrupting data.
Windows Users
- Download and launch “Putty” http://www.chiark.greenend.org.uk/~s.../download.html
- Enter HomeTroller Zee IP address into the “Host Name” field and click the “Open” button.
- Putty will open a command prompt window and connect to your HomeTroller Zee
- Enter your master username and password. If you’ve never changed this, use the default login:
- login as: homeseer
- password: hsthsths3
- Enter cd /usr/local/HomeSeer
- Enter ./updatehs.sh 83 (replace the 83 with the version # you want to install)
- The update will now install. When finished, the command prompt will return
- Power cycle Your HomeTroller Zee and access the web interface. You may now register the unit.
Mac Users
- Launch “Terminal” (located in the “Utilities” folder inside the “Applications” folder)
- When the command prompt appears, enter: SSH-L (followed by IP Address of Your HomeTroller Zee)
- Example: ssh -l 192.168.2.44
- Enter your master username and password. If you’ve never changed this, the log in is as follows:
- login as: homeseer
- password: hsthsths3
- Enter cd /usr/local/HomeSeer
- Enter ./updatehs.sh 83 (replace the 83 with the version # you want to install)
- The update will now install. When finished, the command prompt will return
- Power cycle Your HomeTroller Zee and access the web interface. You may now register the unit.
All Users
Be sure to check periodically for updates by navigating to the “Setup” screen of your HomeTroller Zee.
[/FONT][/SIZE]
Comment