www.homeseer.com    
 

Go Back   HomeSeer Message Board > Lighting & Primary Technology Plug-ins > Lighting & Primary Technology Discussion > HomeSeer Insteon Plug-in

HomeSeer Insteon Plug-in Discussions related to HomeSeer's own Insteon Plug-in

Reply
 
Thread Tools Display Modes
  #1  
Old December 1st, 2016, 07:49 PM
schenkl schenkl is offline
Seer
 
Join Date: Aug 2015
Location: Italy and USA
Posts: 12
Insteon plug in stopped working: can't open /dev/ttyUSB0

Greetings all:
Here is my problem>

i have been using a USB insteon PLM for about a year. Great. Stable. Suddenly is stopped communicating. I changed cables. I bought a new PLM. Same problem.

I am using a a-to-z controller. Plug in version:3.0.6.0
HS3 ZEE S2 Edition 3.0.0.297 (updated to most current version)


dmeg relevant items:
....lots more
[ 1.778750] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 1.780720] Indeed it is in host mode hprt0 = 00001101
[ 1.979041] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
[ 1.980971] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.984150] hub 1-1:1.0: USB hub found
[ 1.986184] hub 1-1:1.0: 5 ports detected
[ 2.268830] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 2.369061] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
[ 2.371026] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.376033] smsc95xx v1.0.4
[ 2.442690] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-bcm2708_usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:38:c8:e5
[ 2.538846] usb 1-1.3: new full-speed USB device number 4 using dwc_otg
[ 2.666754] usb 1-1.3: New USB device found, idVendor=0403, idProduct=6001
[ 2.668917] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.671029] usb 1-1.3: Product: FT232R USB UART
[ 2.673047] usb 1-1.3: Manufacturer: FTDI
[ 2.674897] usb 1-1.3: SerialNumber: A600B4K2
[ 2.735988] udevd[181]: starting version 175
[ 3.220558] usbcore: registered new interface driver usbserial
[ 3.235128] usbcore: registered new interface driver usbserial_generic
[ 3.238743] usbserial: USB Serial support registered for generic
[ 3.259721] usbcore: registered new interface driver ftdi_sio
[ 3.262201] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 3.268478] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
[ 3.274010] usb 1-1.3: Detected FT232RL
[ 3.279534] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUSB0
....and more

so it seems to find it

the Insteon plug in log:
Insteon Plug-in Error Log Generated 12/1/2016 5:34:23 PM
-----------*Error Message*----------------
Error: Forced error / log generation -- 12/1/2016 5:34:23 PM
--------*Initialization Log*--------------
12/1/2016 5:33:47 PM - Host System: () 3.0.0.280
12/1/2016 5:33:47 PM - Plugin HSPI_Insteon.exe version: 3.0.6.0
12/1/2016 5:33:47 PM - Insteon Support library (Insteon.dll) version: 1.0.6.0
12/1/2016 5:33:47 PM - RegisterCallback Completed
12/1/2016 5:33:47 PM - Enter InitIO
12/1/2016 5:33:47 PM - Enter InitPlugin
12/1/2016 5:33:47 PM - Global initialization of plug-in required, starting up.
12/1/2016 5:33:47 PM - Initializing Insteon hardware interface...
12/1/2016 5:33:47 PM - In ProcessRawReceiveThread
12/1/2016 5:33:47 PM - Initializing Interface...
12/1/2016 5:33:47 PM - In PLMBuffer_ProcessBufferThread
12/1/2016 5:33:47 PM - Sending command 02 60 to Interface, (Expecting 6 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
12/1/2016 5:33:48 PM - ..Got NAK from the Interface for command
12/1/2016 5:33:48 PM - ..Retry #1 required. Pausing 250ms for Interface to clear...
12/1/2016 5:33:48 PM - ..Got NAK from the Interface for command
12/1/2016 5:33:48 PM - ..Retry #2 required. Pausing 300ms for Interface to clear...
12/1/2016 5:33:49 PM - ..Got NAK from the Interface for command
12/1/2016 5:33:49 PM - Insteon hardware interface initialization failed.
12/1/2016 5:33:49 PM - Exit InitIO

-----------*Pre-Error Log*----------------
12/1/2016 5:33:49 PM - Could not contact Interface on /dev/ttyUSB0
12/1/2016 5:33:49 PM - Port_DataReceived Error: Specified port is not open.
12/1/2016 5:33:49 PM - Port_DataReceived Error: Specified port is not open.
12/1/2016 5:33:49 PM - Port_DataReceived Error: Specified port is not open.

etc....
but the plug in can not open the port



the listing lsusb:
Bus 001 Device 002: ID 0424:9514 Standard Microsystems Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 0424:ec00 Standard Microsystems Corp.
Bus 001 Device 004: ID 0403:6001 Future Technology Devices International, Ltd FT232 USB-Serial (UART) IC

sometimes is works for a few seconds then quits (I think), giving me the same error messages

Can anyone help me...I am at the end of my ropes. Why did it suddenly stop woking? And more importantly, how can I fix it?

Many thanks!

Last edited by schenkl; December 1st, 2016 at 08:00 PM.
Reply With Quote
  #2  
Old December 23rd, 2016, 11:23 AM
mnsandler's Avatar
mnsandler mnsandler is offline
Insteon Overlord
 
Join Date: Apr 2005
Location: Virginia
Posts: 10,326
if you are still having problems, please start a thread in my forum. This forum is for the homeseer plugin not mine.

http://board.homeseer.com/forumdisplay.php?f=792
__________________
Mark

HS3 Pro 3.0.0.368
Hardware: Insteon Serial PLM | Vista Alarm 20P with AD2USB | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway
Plugins: Insteon 3.0.6.23 (mine) | Vista Alarm (mine) | Omnistat 3 (by Kirby) | Ultra1Wire | RFXCOM | NetCAM | MyQ | BLRadar | Jon00 Charting
Platform: HP h8-1360t, Windows Server 2012 R2, i7-3.4GHz, 16GB memory
Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Under open api kideon HomeSeer General Discussion Area 0 May 10th, 2016 01:20 PM
Open IOS app??? cpd5899 HS3Touch Clients - Apple IOS 4 February 14th, 2016 01:17 AM
Micro Module Open/Close won't Open/Close mathd Insteon Plug-in (Mark Sandler) 10 November 28th, 2014 04:26 PM
cant open com port collegeboyslive HomeSeer General Discussion Area 2 November 24th, 2008 09:42 AM
Wire for the Open Air Mic shaurya HomeSeer General Discussion Area 6 August 12th, 2005 10:17 PM


All times are GMT -4. The time now is 11:20 PM.


Copyright HomeSeer Technologies, LLC