Announcement

Collapse
No announcement yet.

Trouble adding Aeotec Meter

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Trouble adding Aeotec Meter

    I added this meter as you normally would, but it's not showing any values on the device list page. Log below during the Add Node process. The meter has two clamps that are supposed to read kwh, amps, etc.

    Code:
    Add Node started...
    Activate the 'Add to Network' function on the device...
    Activate the 'Add to Network' function on the device...
    Adding a new SLAVE NODE...
    DONE - Add Node Operation is Complete.
    Done. Node 17 Added. 
    Reloading (importing) node information...
    Synchronizing node information with HomeSeer and creating new device(s) as necessary...
    Synchronize nodes finished. Number of device nodes to be created/added = 1
    Adding using S0 Security, Negotiating or Verifying SECURITY SCHEME for node 17
    Warning: Failed to get a SECURITY SCHEME or verify the key from node 17. Device may not be added properly to HomeSeer.
    Warning: If this is an import, you may need to remove and add the device as some devices cannot be added with an import.
    Z-Wave manufacturer information for node 17, ID: 134=86H (Aeon Labs), Type: 258=102H, ID: 95=5FH
    Node: 17 Supports Class(es): ZWAVEPLUS_INFO_V2, VERSION_V2, MANUFACTURER_SPECIFIC, SECURITY, CRC_16_ENCAP
    Node: 17 Supports Secure Class(es): VERSION_V2, MANUFACTURER_SPECIFIC, METER, CRC_16_ENCAP, MULTI_CHANNEL_V3, CONFIGURATION, ASSOCIATION_GRP_INFO, ASSOCIATION, FIRMWARE_UPDATE_MD_V3, POWERLEVEL, DEVICE_RESET_LOCALLY
    Node: 17 Controls Class(es): DEVICE_RESET_LOCALLY
    Node 17 is Z-Wave version: Lib: 3.92 App: 1.31
    Node 17 is a Z-Wave Plus node. Retrieving ZWPlus Info...
    Warning: An error (B) was reported attempting to get multi-channel or multi-instance information from node 17
    Warning: The device at node 17 should result in 1 child devices being created, but the node interrogation currently has 0. This may still result in a successful child creation.
    Finished.
    Saving network information to file: ZNet_HomeSeer Controller_D47C9339_2018-02-02_15.44.00.ZWave. Please wait...
    Done!
    Attached Files

    #2
    Try adding it "non secure" and it should work.
    💁‍♂️ Support & Customer Service 🙋‍♂️ Sales Questions 🛒 Shop HomeSeer Products

    Comment

    Working...
    X