I am using a new HS6 Standard with 4GB of RAM, as below:
Current Date/Time: 1/6/2016 2:27:31 PM
HomeSeer Version: HS3 Standard Edition 3.0.0.208
Operating System: Microsoft Windows Embedded Standard - Work Station
System Uptime: 1 Day 22 Hours 24 Minutes 6 Seconds
IP Address: 192.168.1.11
Number of Devices: 184
Number of Events: 50
Enabled Plug-Ins
3.0.0.89: HSTouch Server
3.0.0.11: NetCAM
1.0.0.2: Restart
3.0.0.21: Sonos
3.1.3.2: SqueezeBox
3.0.1.0: ThinkingCleaner
3.0.1.54: Z-Wave
I am running:
purchased version of the Squeezebox PI.
LMS version 7.7.5 (stock configurations) on this same HS6 server.
SqueezeLite Clients on Raspberry PIs (PiCorePlayer v1.191 https://sites.google.com/site/picoreplayer/home/news very cool stuff and they have my donations
All Players have speak volume maxed.
I play music all day long and that works well. HS and the SB PI can control the squeezelite players for track selection, volume, etc.
The pdf that you created is great and better than most; however, there are some typos in the sections that have code samples. This isn't good, and I am getting syntax errors.
In the pdf, you have:
hs. Speak "hello", False, LMS:Player 1
However, I know that it should at least be changed to:
hs.Speak "hello", False, LMS:Player 1
I am still getting a syntax error. The name of my server is hometroller and not LMS, so mine reads:
hs. Speak "hello", False, hometroller:*
When I enter this in the control panel Immediate Script Command section, I get in the log file:
Jan-06 14:38:56 Error Running script(2) &hs.Speak "hello, test, test, one, two, three", False, hometroller:*, init error: Syntax error
Also, no changes happen in the playlist of the squeezelite players.
If I run the following instead
&hs.Speak "hello, test, test, one, two, three", False, hometroller:*
then the following happens:
C:\Program Files\HomeSeer HS3\html\SqueezeBox\SpeakIn_8.mp3
and
C:\Program Files\HomeSeer HS3\html\SqueezeBox\SpeakIn_8.wav
are created
The playlist for my squeezelite player is amended with
http://192.168.1.11/Squeezebox/SpeakIn_8.mp3
appearing below the Pandora listing.
The audio on the squeezelite player goes silent.
Every connected speaker client (phone, HS table unit, etc.) speaks the TTS.
Eventually, the listing in the squeezelite player playlist for the .mp3 file disappears and the music resumes.
The files in the
C:\Program Files\HomeSeer HS3\html\SqueezeBox
directory aren't removed. They just stay there until I manually delete them.
I have noticed something interesting. If I add the
C:\Program Files\HomeSeer HS3\html\SqueezeBox
directory as a music location in LMS, I can see the audio files in the LMS media browser and play the .mp3 files. The wave files aren't able to be played by my squeezelite players (just silence), but the mp3's play fine.
If I add that
http://192.168.1.11/Squeezebox/SpeakIn_8.mp3
to the TuneIn menu in the LMS media control, it errors out and doesn't play on the squeezelite player
I've attached the configuration in the SqueezeBox PI menus in the form of screenshots.
Please tell me how to work through this. I have already purchased two copies of your plug in, one for my lab and one that is installed at a customer site. I have the TTS working with Sonos as well via the (free) Sonos PI. That was only about 10 minutes to set up. I have been struggling with this PI for several days to no avail.
Thank you.
Current Date/Time: 1/6/2016 2:27:31 PM
HomeSeer Version: HS3 Standard Edition 3.0.0.208
Operating System: Microsoft Windows Embedded Standard - Work Station
System Uptime: 1 Day 22 Hours 24 Minutes 6 Seconds
IP Address: 192.168.1.11
Number of Devices: 184
Number of Events: 50
Enabled Plug-Ins
3.0.0.89: HSTouch Server
3.0.0.11: NetCAM
1.0.0.2: Restart
3.0.0.21: Sonos
3.1.3.2: SqueezeBox
3.0.1.0: ThinkingCleaner
3.0.1.54: Z-Wave
I am running:
purchased version of the Squeezebox PI.
LMS version 7.7.5 (stock configurations) on this same HS6 server.
SqueezeLite Clients on Raspberry PIs (PiCorePlayer v1.191 https://sites.google.com/site/picoreplayer/home/news very cool stuff and they have my donations
All Players have speak volume maxed.
I play music all day long and that works well. HS and the SB PI can control the squeezelite players for track selection, volume, etc.
The pdf that you created is great and better than most; however, there are some typos in the sections that have code samples. This isn't good, and I am getting syntax errors.
In the pdf, you have:
hs. Speak "hello", False, LMS:Player 1
However, I know that it should at least be changed to:
hs.Speak "hello", False, LMS:Player 1
I am still getting a syntax error. The name of my server is hometroller and not LMS, so mine reads:
hs. Speak "hello", False, hometroller:*
When I enter this in the control panel Immediate Script Command section, I get in the log file:
Jan-06 14:38:56 Error Running script(2) &hs.Speak "hello, test, test, one, two, three", False, hometroller:*, init error: Syntax error
Also, no changes happen in the playlist of the squeezelite players.
If I run the following instead
&hs.Speak "hello, test, test, one, two, three", False, hometroller:*
then the following happens:
C:\Program Files\HomeSeer HS3\html\SqueezeBox\SpeakIn_8.mp3
and
C:\Program Files\HomeSeer HS3\html\SqueezeBox\SpeakIn_8.wav
are created
The playlist for my squeezelite player is amended with
http://192.168.1.11/Squeezebox/SpeakIn_8.mp3
appearing below the Pandora listing.
The audio on the squeezelite player goes silent.
Every connected speaker client (phone, HS table unit, etc.) speaks the TTS.
Eventually, the listing in the squeezelite player playlist for the .mp3 file disappears and the music resumes.
The files in the
C:\Program Files\HomeSeer HS3\html\SqueezeBox
directory aren't removed. They just stay there until I manually delete them.
I have noticed something interesting. If I add the
C:\Program Files\HomeSeer HS3\html\SqueezeBox
directory as a music location in LMS, I can see the audio files in the LMS media browser and play the .mp3 files. The wave files aren't able to be played by my squeezelite players (just silence), but the mp3's play fine.
If I add that
http://192.168.1.11/Squeezebox/SpeakIn_8.mp3
to the TuneIn menu in the LMS media control, it errors out and doesn't play on the squeezelite player
I've attached the configuration in the SqueezeBox PI menus in the form of screenshots.
Please tell me how to work through this. I have already purchased two copies of your plug in, one for my lab and one that is installed at a customer site. I have the TTS working with Sonos as well via the (free) Sonos PI. That was only about 10 minutes to set up. I have been struggling with this PI for several days to no avail.
Thank you.
Comment