Transitioning from HS2 to HS3
Plugin worked with HS2
It is not working with HS3
It is also now not working with HS2 system.
Has been and continues to be connected through a Belkin Network USB hub
Panel is vista20P
Here's what i did:
Shutdown HS2
Startup HS3
Install plugin from updater
configure for same com port
restart hs3
start monitor
The following is the HS3 log entries
Shutdown HS3...
Tried connecting with Putty... non responsive... and garbage characters (looks like wrong baud rate.
Startup HS2.
Plugin no longer works.... (same type of log entries as HS3 log above)
CHecked Serial wiring between Ad2USb and panel... looks ok
Theory..
I fried the "Transmit" my AD2USB ?
It receives fine... but is mute (not sending to Panel) ??
I'm lost.. .. any ideas ?
Thanks in advance.
Plugin worked with HS2
It is not working with HS3
It is also now not working with HS2 system.
Has been and continues to be connected through a Belkin Network USB hub
Panel is vista20P
Here's what i did:
Shutdown HS2
Startup HS3
Install plugin from updater
configure for same com port
restart hs3
start monitor
The following is the HS3 log entries
HTML Code:
Jul-12 6:19:50 AM Vista Alarm Monitor terminated...
Jul-12 6:19:50 AM Vista Alarm Closed COM port COM1
Jul-12 6:19:45 AM Vista Alarm !Sending.done
Jul-12 6:19:45 AM Vista Alarm Sending *
Jul-12 6:19:35 AM Vista Alarm !Sending.done
Jul-12 6:19:35 AM Vista Alarm Sending *
Jul-12 6:19:26 AM Vista Alarm !Sending.done
Jul-12 6:19:25 AM Vista Alarm Sending *
<snip>
Jul-12 6:15:57 AM Vista Alarm Sending *
Jul-12 6:15:47 AM Vista Alarm !Sending.done
Jul-12 6:15:46 AM Vista Alarm Sending *
Jul-12 6:15:35 AM Vista Alarm !Sending.done
Jul-12 6:15:35 AM Vista Alarm Sending *
Jul-12 6:15:35 AM Vista Alarm Processing msg on Partition 1
Jul-12 6:15:35 AM Vista Alarm [0000000100000000----],008,[f70000071008000c08020000000000],"****DISARMED****Hit * for faults"
Jul-12 6:15:33 AM Vista Alarm Monitor started...
Jul-12 6:15:33 AM Vista Alarm Received msg: !VER:ffffffff,V2.2a.6,TX;RX;SM;VZ;RF;ZX;RE;AU;3X;CG;DD;MF;LR;KE;MK;CB
Jul-12 6:15:33 AM Vista Alarm Found the AD2USB on port COM1 running firmware version V2.2a.6
Jul-12 6:15:33 AM Vista Alarm Loading RF Devices...
Jul-12 6:15:33 AM Vista Alarm Opened COM port COM1
Jul-12 6:15:33 AM Vista Alarm Sent cmd: V
Jul-12 6:15:32 AM Vista Alarm Loading the Partitions
Tried connecting with Putty... non responsive... and garbage characters (looks like wrong baud rate.
Startup HS2.
Plugin no longer works.... (same type of log entries as HS3 log above)
CHecked Serial wiring between Ad2USb and panel... looks ok
Theory..
I fried the "Transmit" my AD2USB ?
It receives fine... but is mute (not sending to Panel) ??
I'm lost.. .. any ideas ?
Thanks in advance.
Comment