Announcement

Collapse
No announcement yet.

Insteon PLM Plug-In Version 1.7.0.0 Beta

Collapse
This topic is closed.
X
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    #61
    Originally posted by oztiks View Post
    I just shut off the breaker to the master bathroom, doing a reprogram now.

    I am curious - are all these "JUNK" messages expected or something that I can resolve?
    The Junk msgs are not expected. I'm hoping they go away after the reset and reprogram. But yes, this can be resolved but no necessarily through the plugin. its more of hw issue

    In general you should see very few Junk msgs and plm retries if everything is working nicely.
    Mark

    HS3 Pro 4.2.19.5
    Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
    Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
    Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

    Comment


      #62
      Good to know about the SW HW reset. I didnt know that had to be done if a switch failed to add.

      Either way, I:

      Shut off bathroom breaker (it's still off);
      Did PLM reset/reprogram
      HW reset on 1B.BE.F9

      Attempted a new manual add:

      4/6/2012 2:01:10 PM - Insteon - Manual Add Selected
      4/6/2012 2:01:16 PM - Insteon - Confirm Add Device Selected
      4/6/2012 2:01:16 PM - Insteon - Set add job data : Name:New Lamp Module
      4/6/2012 2:01:16 PM - Insteon - Launching new BackgroundUpdate Thread with job type 20...
      4/6/2012 2:01:16 PM - Insteon - In BackgroundUpdate Thread...
      4/6/2012 2:01:16 PM - Insteon - Attempting to add Device 1B.BE.F9
      4/6/2012 2:01:16 PM - Insteon - Scheduled polling temporarily stopped.
      4/6/2012 2:01:16 PM - Insteon - Calling PLM_AddID for 1B.BE.F9 1 True
      4/6/2012 2:01:16 PM - Insteon - Sending command 02 6F 41 A2 01 1B BE F9 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:True
      4/6/2012 2:01:16 PM - Insteon - ..Got junk instead of ACK/NAK for command C3 6F E1 B2 01 1B BE F9 00 00 00 00
      4/6/2012 2:01:16 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
      4/6/2012 2:01:17 PM - Insteon - ..Got junk instead of ACK/NAK for command FE C1 A2 01 1B BE F9 00 00 00 15 00
      4/6/2012 2:01:17 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
      4/6/2012 2:01:18 PM - Insteon - ..Got PLM Response 02 6F 41 A2 01 1B BE F9 00 00 00 15
      4/6/2012 2:01:19 PM - Insteon - Sending Insteon ID Broadcast for '1B.BE.F9'
      4/6/2012 2:01:19 PM - Insteon - Sending command 02 62 1B BE F9 0F 10 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
      4/6/2012 2:01:19 PM - Insteon - ..Got PLM Response 02 62 1B BE F9 0F 10 00 06
      4/6/2012 2:01:19 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B BE F9 0E DA 13 2B 10 00 - Event: New msg for PLM, Src[1B.BE.F9] Dst[0E.DA.13] {Ack/Dir} Cmd1: ID Rqst Cmd2: 00
      4/6/2012 2:01:19 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B BE F9 01 19 40 8B 01 00 - Event: New msg for PLM, Src[1B.BE.F9] Dst[--.--.--] {Brdcst} Cmd1: Device ID Broadcast/Set button slave, Type:0119 Firmware Ver:40 Cmd2: 00
      4/6/2012 2:01:19 PM - Insteon - Got controller/responder type broadcast for Insteon ID 1B.BE.F9 of type 0119, Firmware version 40
      4/6/2012 2:01:19 PM - Insteon - GetInsteonProtocol for '1B.BE.F9'
      4/6/2012 2:01:19 PM - Insteon - Sending command 02 62 1B BE F9 0F 0D 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
      4/6/2012 2:01:19 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B BE F9 01 19 40 8B 01 00 - Event: New msg for PLM, Src[1B.BE.F9] Dst[--.--.--] {Brdcst} Cmd1: Device ID Broadcast/Set button slave, Type:0119 Firmware Ver:40 Cmd2: 00
      4/6/2012 2:01:19 PM - Insteon - ..Got PLM Response 02 62 1B BE F9 0F 0D 00 06
      4/6/2012 2:01:20 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B BE F9 0E DA 13 2B 0D 01 - Event: New msg for PLM, Src[1B.BE.F9] Dst[0E.DA.13] {Ack/Dir} Cmd1: Get Engine Cmd2: 01
      4/6/2012 2:01:20 PM - Insteon - Got Insteon Protocol Engine response from Insteon ID 1B.BE.F9, Protocol i2
      4/6/2012 2:01:20 PM - Insteon - Sending command 02 62 1B BE F9 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
      4/6/2012 2:01:20 PM - Insteon - ..Got junk instead of ACK/NAK for command 02 62 1F FF FF F6 02 02 03 02 02 FE 00 81 81 00 00 00 00 00 00 06 00
      4/6/2012 2:01:20 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
      4/6/2012 2:01:20 PM - Insteon - PLMBuffer_Clean - Cleared: 50 1B BE F9 0E DA 13 2B 2E to locate next possible STX
      4/6/2012 2:01:21 PM - Insteon - PLMBuffer_Clean - Cleared: 00 to locate next possible STX
      4/6/2012 2:01:21 PM - Insteon - Received STX 0x51 (Raw Insteon Rec):01 1B BE F9 0E DA 13 11 2E 00 01 60 20 20 24 20 E4 80 00 00 29 6B 00 15 - Event: New msg for PLM, Src[1B.BE.F9] Dst[0E.DA.13] {Extended} Cmd1: EX Get/Set Cmd2: 00 01 60 20 20 24 20 E4 80 00 00 29 6B 00 15
      4/6/2012 2:01:27 PM - Insteon - ..Got junk instead of ACK/NAK for command 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      4/6/2012 2:01:27 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
      4/6/2012 2:01:27 PM - Insteon - ..Got junk instead of ACK/NAK for command FF 7F F9 7F E6 82 00 00 00 00 00 00 00 00 00 00 00 06 02 50 1B BE 00
      4/6/2012 2:01:27 PM - Insteon - PLMBuffer_Clean - Cleared: FE 15 0E DA 13 2B 2E to locate next possible STX
      4/6/2012 2:01:27 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
      4/6/2012 2:01:28 PM - Insteon - PLMBuffer_Clean - Cleared: 00 to locate next possible STX
      4/6/2012 2:01:28 PM - Insteon - Received STX 0x51 (Raw Insteon Rec):01 1B BE F9 0E DA 13 11 2E 00 01 01 00 00 20 00 1C FE 00 00 00 22 83 00 - Event: New msg for PLM, Src[1B.BE.F9] Dst[0E.DA.13] {Extended} Cmd1: EX Get/Set Cmd2: 00 01 01 00 00 20 00 1C FE 00 00 00 22 83 00
      4/6/2012 2:01:28 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 7F F9 F9 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00
      4/6/2012 2:01:28 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
      4/6/2012 2:01:28 PM - Insteon - PLMBuffer_Clean - Cleared: 50 1B BE F9 0E DA 13 2B 2E to locate next possible STX
      4/6/2012 2:01:29 PM - Insteon - PLMBuffer_Clean - Cleared: 00 to locate next possible STX
      4/6/2012 2:01:29 PM - Insteon - Received STX 0x51 (Raw Insteon Rec):01 1B BE F9 0E DA 13 11 2E 00 01 01 00 00 20 00 1C FE 00 00 00 26 84 00 - Event: New msg for PLM, Src[1B.BE.F9] Dst[0E.DA.13] {Extended} Cmd1: EX Get/Set Cmd2: 00 01 01 00 00 20 00 1C FE 00 00 00 26 84 00
      4/6/2012 2:01:29 PM - Insteon - ..Got junk instead of ACK/NAK for command FF 7F F9 F9 F6 02 00 00 00 00 00 00 00 00 00 00 00 06 02 50 1B BE 00
      4/6/2012 2:01:29 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B BE F9 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      4/6/2012 2:01:29 PM - Insteon - PLMBuffer_Clean - Cleared: 0E DA 13 2B 2E to locate next possible STX
      4/6/2012 2:01:29 PM - Insteon - Sending command 02 62 1B BE F9 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
      4/6/2012 2:01:30 PM - Insteon - ..Got junk instead of ACK/NAK for command F1 15 02 51 1B BE F9 0E DA 13 11 2E 00 01 01 00 00 20 00 1C FE 00 00
      4/6/2012 2:01:30 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
      4/6/2012 2:01:30 PM - Insteon - PLMBuffer_Clean - Cleared: 00 00 26 84 to locate next possible STX
      4/6/2012 2:01:31 PM - Insteon - ..Got junk instead of ACK/NAK for command E3 F4 7E F6 02 FE 00 00 00 00 00 00 00 00 00 00 00 06 02 50 1B BE 00
      4/6/2012 2:01:31 PM - Insteon - PLMBuffer_Clean - Cleared: 00 0E DA 13 2B 2E to locate next possible STX
      4/6/2012 2:01:31 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
      4/6/2012 2:01:31 PM - Insteon - PLMBuffer_Clean - Cleared: 00 to locate next possible STX
      4/6/2012 2:01:31 PM - Insteon - Received STX 0x51 (Raw Insteon Rec):01 1B BE F9 0E DA 13 11 2E 00 01 01 00 00 20 00 1C FE 00 00 00 26 86 00 - Event: New msg for PLM, Src[1B.BE.F9] Dst[0E.DA.13] {Extended} Cmd1: EX Get/Set Cmd2: 00 01 01 00 00 20 00 1C FE 00 00 00 26 86 00
      4/6/2012 2:01:32 PM - Insteon - ..Got junk instead of ACK/NAK for command FF 33 EB E6 42 00 00 00 00 00 00 00 00 00 00 00 06 02 50 1B BE F9 00
      4/6/2012 2:01:32 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
      4/6/2012 2:01:32 PM - Insteon - PLMBuffer_Clean - Cleared: DA 13 2B 2E to locate next possible STX
      4/6/2012 2:01:32 PM - Insteon - PLMBuffer_Clean - Cleared: 00 to locate next possible STX
      4/6/2012 2:01:32 PM - Insteon - Received STX 0x51 (Raw Insteon Rec):01 1B BE F9 0E DA 13 11 2E 00 01 01 00 00 20 00 1C FE 00 00 00 26 86 00 - Event: New msg for PLM, Src[1B.BE.F9] Dst[0E.DA.13] {Extended} Cmd1: EX Get/Set Cmd2: 00 01 01 00 00 20 00 1C FE 00 00 00 26 86 00
      4/6/2012 2:01:33 PM - Insteon - ..Got junk instead of ACK/NAK for command FF 1B BE FD F6 82 80 00 00 00 00 00 00 00 00 00 00 00 06 02 50 1B 00
      4/6/2012 2:01:33 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
      4/6/2012 2:01:33 PM - Insteon - PLMBuffer_Clean - Cleared: F9 0E DA 13 2B 2E to locate next possible STX
      4/6/2012 2:01:33 PM - Insteon - PLMBuffer_Clean - Cleared: 00 to locate next possible STX
      4/6/2012 2:01:33 PM - Insteon - Received STX 0x51 (Raw Insteon Rec):01 1B BE F9 0E DA 13 11 2E 00 01 01 00 00 20 00 1C FE 00 00 00 24 87 00 - Event: New msg for PLM, Src[1B.BE.F9] Dst[0E.DA.13] {Extended} Cmd1: EX Get/Set Cmd2: 00 01 01 00 00 20 00 1C FE 00 00 00 24 87 00
      4/6/2012 2:01:34 PM - Insteon - ..Got junk instead of ACK/NAK for command 81 1F BE F9 F6 02 06 02 02 02 FE 00 00 00 00 00 00 00 00 00 00 06 00
      4/6/2012 2:01:34 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B BE F9 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      4/6/2012 2:01:34 PM - Insteon - Sending command 02 62 1B BE F9 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
      4/6/2012 2:01:34 PM - Insteon - PLMBuffer_Clean - Cleared: 50 1B BE F9 0E DA 13 2B 2E to locate next possible STX
      4/6/2012 2:01:34 PM - Insteon - ..Got junk instead of ACK/NAK for command FC 02 51 1B BE F9 0E DA 13 11 2E 00 01 01 00 00 20 00 1C FE 00 00 00
      4/6/2012 2:01:34 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
      4/6/2012 2:01:34 PM - Insteon - PLMBuffer_Clean - Cleared: 00 24 87 00 to locate next possible STX
      4/6/2012 2:01:35 PM - Insteon - ..Got junk instead of ACK/NAK for command B3 FE F6 C2 80 04 04 04 04 04 04 04 04 04 64 FC 02 50 1B BE F9 0E 00
      4/6/2012 2:01:35 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
      4/6/2012 2:01:35 PM - Insteon - PLMBuffer_Clean - Cleared: 15 13 2B 2E to locate next possible STX
      4/6/2012 2:01:35 PM - Insteon - PLMBuffer_Clean - Cleared: 00 to locate next possible STX
      4/6/2012 2:01:35 PM - Insteon - Received STX 0x51 (Raw Insteon Rec):01 1B BE F9 0E DA 13 11 2E 00 01 01 00 00 20 00 1C FE 00 00 00 1A 88 00 - Event: New msg for PLM, Src[1B.BE.F9] Dst[0E.DA.13] {Extended} Cmd1: EX Get/Set Cmd2: 00 01 01 00 00 20 00 1C FE 00 00 00 1A 88 00
      4/6/2012 2:01:36 PM - Insteon - ..Got NAK from the PLM for command
      4/6/2012 2:01:36 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
      4/6/2012 2:01:37 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 7F F9 FD F6 03 02 03 02 FE 80 FF 40 40 00 00 00 00 00 00 00 06 00
      4/6/2012 2:01:37 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
      4/6/2012 2:01:37 PM - Insteon - PLMBuffer_Clean - Cleared: 50 1B BE F9 0E DA 13 2B 2E 00 to locate next possible STX
      4/6/2012 2:01:37 PM - Insteon - Received STX 0x51 (Raw Insteon Rec):01 1B BE F9 0E DA 13 11 2E 00 01 01 00 00 20 00 1C FE 00 00 00 29 91 00 - Event: New msg for PLM, Src[1B.BE.F9] Dst[0E.DA.13] {Extended} Cmd1: EX Get/Set Cmd2: 00 01 01 00 00 20 00 1C FE 00 00 00 29 91 00
      4/6/2012 2:01:38 PM - Insteon - ..Got NAK from the PLM for command
      4/6/2012 2:01:38 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B BE F9 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      4/6/2012 2:01:38 PM - Insteon - Sending command 02 62 1B BE F9 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
      4/6/2012 2:01:39 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 62 1B BE F9 F6 03 FE C0 80 00 00 00 00 00 00 00 06 02 50 1B BE 00
      4/6/2012 2:01:39 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
      4/6/2012 2:01:39 PM - Insteon - PLMBuffer_Clean - Cleared: 0E DA 13 2B 2E 00 to locate next possible STX
      4/6/2012 2:01:39 PM - Insteon - Received STX 0x51 (Raw Insteon Rec):01 1B BE F9 0E DA 13 11 2E 00 01 01 00 00 20 00 1C FE 00 00 00 24 97 00 - Event: New msg for PLM, Src[1B.BE.F9] Dst[0E.DA.13] {Extended} Cmd1: EX Get/Set Cmd2: 00 01 01 00 00 20 00 1C FE 00 00 00 24 97 00
      4/6/2012 2:01:40 PM - Insteon - ..Got junk instead of ACK/NAK for command E5 15 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      4/6/2012 2:01:40 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
      4/6/2012 2:01:41 PM - Insteon - ..Got junk instead of ACK/NAK for command EB B3 EF FE C2 80 00 00 00 00 00 00 00 00 06 02 50 1B BE F9 0E DA 00
      4/6/2012 2:01:41 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
      4/6/2012 2:01:41 PM - Insteon - PLMBuffer_Clean - Cleared: 2B 2E to locate next possible STX
      4/6/2012 2:01:42 PM - Insteon - PLMBuffer_Clean - Cleared: 00 to locate next possible STX
      4/6/2012 2:01:42 PM - Insteon - Received STX 0x51 (Raw Insteon Rec):01 1B BE F9 0E DA 13 11 2E 00 01 01 00 00 20 00 1C FE 00 00 00 29 9A 00 - Event: New msg for PLM, Src[1B.BE.F9] Dst[0E.DA.13] {Extended} Cmd1: EX Get/Set Cmd2: 00 01 01 00 00 20 00 1C FE 00 00 00 29 9A 00
      4/6/2012 2:01:43 PM - Insteon - ..Got NAK from the PLM for command
      4/6/2012 2:01:43 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
      4/6/2012 2:01:44 PM - Insteon - ..Got junk instead of ACK/NAK for command FB 6F F9 FD F6 02 02 03 02 02 FE 00 00 00 00 00 00 00 00 00 00 06 00
      4/6/2012 2:01:44 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B BE F9 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      4/6/2012 2:01:44 PM - Insteon - Sending command 02 62 1B BE F9 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
      4/6/2012 2:01:44 PM - Insteon - PLMBuffer_Clean - Cleared: 50 1B BE F9 0E DA 13 2B 2E to locate next possible STX
      4/6/2012 2:01:44 PM - Insteon - ..Got junk instead of ACK/NAK for command F9 15 02 51 1B BE F9 0E DA 13 11 2E 00 01 01 00 00 20 00 1C FE 00 00
      4/6/2012 2:01:44 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
      4/6/2012 2:01:44 PM - Insteon - PLMBuffer_Clean - Cleared: 00 00 23 A2 to locate next possible STX
      4/6/2012 2:01:45 PM - Insteon - ..Got junk instead of ACK/NAK for command FF E4 EF F6 02 03 02 02 02 FE 00 00 00 00 00 00 00 00 00 00 06 02 00
      4/6/2012 2:01:45 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
      4/6/2012 2:01:45 PM - Insteon - PLMBuffer_Clean - Cleared: 00 1B BE F9 0E DA 13 2B 2E to locate next possible STX
      4/6/2012 2:01:45 PM - Insteon - ..Got junk instead of ACK/NAK for command 02 51 1B BE F9 0E DA 13 11 2E 00 01 01 00 9E FE 04 04 04 23 A2 00 00
      4/6/2012 2:01:45 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
      4/6/2012 2:01:45 PM - Insteon - PLMBuffer_Clean - Cleared: 00 to locate next possible STX
      4/6/2012 2:01:45 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 62 1B FE FF F6 02 02 03 03 02 FE 00 80 80 00 00 00 00 00 00 00 00
      4/6/2012 2:01:45 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
      4/6/2012 2:01:46 PM - Insteon - ..Got junk instead of ACK/NAK for command C5 FE 15 02 50 1B BE F9 0E DA 13 2B 2E 00 02 51 1B BE F9 0E DA 13 00
      4/6/2012 2:01:46 PM - Insteon - PLMBuffer_Clean - Cleared: 15 2E 00 01 01 00 00 20 00 1C FE 00 00 00 23 to locate next possible STX
      4/6/2012 2:01:46 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B BE F9 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
      4/6/2012 2:01:46 PM - Insteon - Transmit failed to device 1B.BE.F9 for cmd 00 00 00 1B BE F9 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 after 5 tries.
      4/6/2012 2:01:46 PM - Insteon - Scheduled polling resumed.
      4/6/2012 2:01:46 PM - Insteon - The device properties could not be read. Communication failure. The device was not added.
      4/6/2012 2:01:46 PM - Insteon - BackgroundUpdate Thread Complete...
      4/6/2012 2:01:46 PM - Insteon - PLMBuffer_Clean - Cleared: A2 to locate next possible STX

      Comment


        #63
        still showing as i2, i don't think the hw reset on the switch took, please try again

        also, plm traffic still doesn't look that great. You have a 2412, correct?
        Mark

        HS3 Pro 4.2.19.5
        Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
        Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
        Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

        Comment


          #64
          Switch reset definitely took : with these switches you pull air gap, wait, push and hold air gap for 5+ seconds, release - and the switch toggles off and then ramps to full bright (just an FYI).

          I do have a 2412 (serial) connected directly to the machine.

          FYI - my whole setup was working GREAT until I added the new 2476D's to replace some Icon switches.

          I personally feel as if my 2412 is behaving erratically, but smarthome assure me "it's fine" even though they have no diagnostic tools of their own to refer me to to test it.
          Last edited by oztiks; April 6, 2012, 01:19 PM. Reason: SH

          Comment


            #65
            I'm going to ask my SH contact about this switch. It shouldn't be responding as an i2 device regardless of the plm, etc. Stay tuned
            Mark

            HS3 Pro 4.2.19.5
            Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
            Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
            Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

            Comment


              #66
              Ok. So despite what SH told you, the switchlincs that are type: 0119 with fw 40 are i2, not i2cs.

              So it might be worth rolling back the plugin to the previous version you were using and see if you have better luck registering and programming them.

              If this works better, please post a log snippet of the registration transaction, I would like to see the difference in the PLM traffic.
              Mark

              HS3 Pro 4.2.19.5
              Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
              Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
              Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

              Comment


                #67
                Should I do 1.7.0.0 or 1.7.0.1?

                Comment


                  #68
                  Originally posted by oztiks View Post
                  Should I do 1.7.0.0 or 1.7.0.1?
                  what were you using when your system was working great? as you mentioned earlier
                  Mark

                  HS3 Pro 4.2.19.5
                  Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
                  Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
                  Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

                  Comment


                    #69
                    Ill try 1.7.0.0 again, then. Everything was good until the new switches. In 1.7.0.0 i got two out of FIVE of the new switches to register. I had to try about 2-5 times to get the switches to register, and even then, i cant read the link tables from them 90% of the time.

                    Comment


                      #70
                      1.7.0.0 is reinstalled.

                      Trying to "read links" from one of the new switches (Front Porch) results in the plugin dying - the page continues to refresh, but it's stuck at

                      Reading remote link database record #1, attempt #4...


                      The plug-in is currently working. This page will refresh regularly and update the status. Do not leave this page until the 'Continue' button is presented.


                      4/6/2012 6:25:25 PM - Insteon - Edit Insteon Device #21 Addr: 1B.B0.4C, Name:Tap-Added SwitchLinc V2 600W Dimmer 0, Location:Front Porch
                      4/6/2012 6:25:29 PM - Insteon - Read Device Links and Settings Selected
                      4/6/2012 6:25:29 PM - Insteon - Launching new BackgroundUpdate Thread with job type 2...
                      4/6/2012 6:25:30 PM - Insteon - In BackgroundUpdate Thread...
                      4/6/2012 6:25:30 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:25:30 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 FE 23 36 EA E4 02 02 02 02 02 FE 00 00 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:25:30 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:30 PM - Insteon - ..Got junk instead of ACK/NAK for command FC F1 15 02 50 1B B0 4C 0E DA 13 2B 2E 00 02 51 1B B0 4C 0E DA 13 00
                      4/6/2012 6:25:30 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:30 PM - Insteon - PLMBuffer_Clean - Cleared: 2E 00 01 01 00 00 20 00 1C 01 00 00 00 1F 3E to locate next possible STX
                      4/6/2012 6:25:31 PM - Insteon - PLMBuffer_Clean - Cleared: 00 1B B0 4C 0E DA 13 2B 2E to locate next possible STX
                      4/6/2012 6:25:31 PM - Insteon - ..Got junk instead of ACK/NAK for command E3 FE 23 3E FF F6 03 FE 80 00 00 00 00 00 00 00 00 00 00 00 06 02 00
                      4/6/2012 6:25:31 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:31 PM - Insteon - PLMBuffer_Clean - Cleared: 00 to locate next possible STX
                      4/6/2012 6:25:32 PM - Insteon - Received STX 0x51 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 11 2E 00 01 01 00 00 20 00 1C 01 00 00 00 1F 3E 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Extended} Cmd1: EX Get/Set Cmd2: 00 01 01 00 00 20 00 1C 01 00 00 00 1F 3E 00
                      4/6/2012 6:25:32 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:25:33 PM - Insteon - ..Got junk instead of ACK/NAK for command FC F1 15 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:25:33 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:33 PM - Insteon - ..Got junk instead of ACK/NAK for command 02 F3 1B B0 4C 1F 2E 00 00 00 00 80 00 00 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:25:33 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:25:33 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:25:34 PM - Insteon - ..Got junk instead of ACK/NAK for command C5 E7 15 02 50 1B B0 4C 0E DA 13 2B 2E 00 02 51 1B B0 4C 0E DA 13 00
                      4/6/2012 6:25:34 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:34 PM - Insteon - PLMBuffer_Clean - Cleared: 2E 00 01 01 00 00 20 00 1C 01 00 00 00 1F to locate next possible STX
                      4/6/2012 6:25:34 PM - Insteon - PLMBuffer_Clean - Cleared: 3E to locate next possible STX
                      4/6/2012 6:25:35 PM - Insteon - ..Got junk instead of ACK/NAK for command FF 33 3E EE F6 02 02 02 02 02 FE 00 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:25:35 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:35 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 2B 2E 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Ack/Dir} Cmd1: EX Get/Set Cmd2: 00
                      4/6/2012 6:25:35 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:25:35 PM - Insteon - Received STX 0x51 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 11 2E 00 01 01 00 00 20 00 1C 01 00 00 00 1F 3E 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Extended} Cmd1: EX Get/Set Cmd2: 00 01 01 00 00 20 00 1C 01 00 00 00 1F 3E 00
                      4/6/2012 6:25:35 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:25:36 PM - Insteon - ..Got junk instead of ACK/NAK for command C3 33 37 EE F4 02 02 02 02 FE 00 00 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:25:36 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:36 PM - Insteon - PLMBuffer_Clean - Cleared: 50 1B B0 4C 0E DA 13 2B 2E to locate next possible STX
                      4/6/2012 6:25:36 PM - Insteon - PLMBuffer_Clean - Cleared: 00 to locate next possible STX
                      4/6/2012 6:25:36 PM - Insteon - Received STX 0x51 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 11 2E 00 01 01 00 00 20 00 1C 01 00 00 00 1F 3E 00 Debouncing repeat.
                      4/6/2012 6:25:37 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 7F C1 CE 1F 2E 00 FD 5F 40 C0 00 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:25:37 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:37 PM - Insteon - PLMBuffer_Clean - Cleared: 50 1B B0 4C 0E DA 13 2B 2E to locate next possible STX
                      4/6/2012 6:25:37 PM - Insteon - PLMBuffer_Clean - Cleared: 00 to locate next possible STX
                      4/6/2012 6:25:37 PM - Insteon - Received STX 0x51 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 11 2E 00 01 01 00 00 20 00 1C 01 00 00 00 1F 3E 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Extended} Cmd1: EX Get/Set Cmd2: 00 01 01 00 00 20 00 1C 01 00 00 00 1F 3E 00
                      4/6/2012 6:25:37 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:25:38 PM - Insteon - ..Got junk instead of ACK/NAK for command C3 7F C1 4C 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:25:38 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:25:38 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:25:38 PM - Insteon - PLMBuffer_Clean - Cleared: 50 1B B0 4C 0E DA 13 2B 2E to locate next possible STX
                      4/6/2012 6:25:38 PM - Insteon - ..Got junk instead of ACK/NAK for command C7 15 02 51 1B B0 4C 0E DA 13 11 2E 00 01 01 00 00 20 00 1C 01 00 00
                      4/6/2012 6:25:38 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:38 PM - Insteon - PLMBuffer_Clean - Cleared: 00 00 1F 3E to locate next possible STX
                      4/6/2012 6:25:39 PM - Insteon - ..Got junk instead of ACK/NAK for command E3 23 3E FF E4 02 02 02 02 FE 00 00 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:25:39 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:39 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 2B 2E 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Ack/Dir} Cmd1: EX Get/Set Cmd2: 00
                      4/6/2012 6:25:39 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:25:39 PM - Insteon - Received STX 0x51 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 11 2E 00 01 01 00 00 20 00 1C 01 00 00 00 1F 3E 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Extended} Cmd1: EX Get/Set Cmd2: 00 01 01 00 00 20 00 1C 01 00 00 00 1F 3E 00
                      4/6/2012 6:25:39 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:25:39 PM - Insteon - ..Got junk instead of ACK/NAK for command C3 F3 1B B0 4C 1F 2F 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:25:39 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:40 PM - Insteon - ..Got junk instead of ACK/NAK for command F1 F9 15 02 50 1B B0 4C 0E DA 13 2B 2E 00 02 51 1B B0 4C 0E DA 13 00
                      4/6/2012 6:25:40 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:40 PM - Insteon - PLMBuffer_Clean - Cleared: 2E 00 01 01 00 00 20 00 1C 01 00 00 00 1F to locate next possible STX
                      4/6/2012 6:25:40 PM - Insteon - PLMBuffer_Clean - Cleared: 3E to locate next possible STX
                      4/6/2012 6:25:40 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 FF 1F B0 4C 1F 2E 80 00 80 00 00 00 F4 08 08 08 08 08 08 08 C8 00
                      4/6/2012 6:25:40 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:25:40 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:25:41 PM - Insteon - ..Got junk instead of ACK/NAK for command F9 15 02 50 1B B0 4C 0E DA 13 2B 2E 00 02 51 1B B0 4C 0E DA 13 11 00
                      4/6/2012 6:25:41 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:41 PM - Insteon - PLMBuffer_Clean - Cleared: 00 00 01 01 00 00 20 00 1C 01 00 00 00 1F 3E to locate next possible STX
                      4/6/2012 6:25:42 PM - Insteon - ..Got junk instead of ACK/NAK for command FF 23 3E EA E6 02 FE 3F E0 00 00 00 00 00 00 00 00 00 00 06 02 50 00
                      4/6/2012 6:25:42 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:42 PM - Insteon - PLMBuffer_Clean - Cleared: 00 B0 4C 0E DA 13 2B 2E to locate next possible STX
                      4/6/2012 6:25:42 PM - Insteon - ..Got junk instead of ACK/NAK for command FF 23 36 EF CC 37 14 E4 03 0F FF 01 00 00 20 00 1C 01 00 00 00 1F 00
                      4/6/2012 6:25:42 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:42 PM - Insteon - PLMBuffer_Clean - Cleared: 00 00 to locate next possible STX
                      4/6/2012 6:25:43 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 1B F8 4C 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:25:43 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:43 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 2B 2E 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Ack/Dir} Cmd1: EX Get/Set Cmd2: 00
                      4/6/2012 6:25:43 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:25:44 PM - Insteon - ..Got junk instead of ACK/NAK for command 11 2E 00 C0 01 80 00 20 00 1C 01 00 00 00 1F 3E 00 15 15 15 00 00 00
                      4/6/2012 6:25:44 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:25:44 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:25:45 PM - Insteon - ..Got junk instead of ACK/NAK for command FF 9F B8 4C 9F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:25:45 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:45 PM - Insteon - Received STX 0x51 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 50 1B B0 4C 0E DA 13 2B 2E 00 02 51 1B B0 4C 0E DA - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {} Cmd1: Unknown 1B Cmd2: B0 4C 0E DA 13 2B 2E 00 02 51 1B B0 4C 0E DA
                      4/6/2012 6:25:45 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:25:45 PM - Insteon - PLMBuffer_Clean - Cleared: 13 11 2E 00 01 01 00 00 to locate next possible STX
                      4/6/2012 6:25:45 PM - Insteon - PLMBuffer_Clean - Cleared: 20 00 1C 01 00 00 00 1F to locate next possible STX
                      4/6/2012 6:25:45 PM - Insteon - PLMBuffer_Clean - Cleared: 3E to locate next possible STX
                      4/6/2012 6:25:46 PM - Insteon - ..Got junk instead of ACK/NAK for command FF 7F C1 4C 1F 2F C0 C0 01 01 FF 00 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:25:46 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:46 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 2B 2E 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Ack/Dir} Cmd1: EX Get/Set Cmd2: 00
                      4/6/2012 6:25:46 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:25:46 PM - Insteon - ..Got junk instead of ACK/NAK for command 81 FE 06 4C 8F DF 13 11 2E 00 01 C0 02 02 E2 0A 02 02 02 FA F2 02 00
                      4/6/2012 6:25:46 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:47 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 1F B0 CC 1F 3E A0 F0 A0 00 80 00 00 00 00 00 00 00 00 06 02 50 00
                      4/6/2012 6:25:47 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:47 PM - Insteon - PLMBuffer_Clean - Cleared: FE B0 4C 0E DA 13 2B 2E to locate next possible STX
                      4/6/2012 6:25:48 PM - Insteon - PLMBuffer_Clean - Cleared: 00 to locate next possible STX
                      4/6/2012 6:25:48 PM - Insteon - Received STX 0x51 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 11 2E 00 01 01 00 00 20 00 1C 01 00 00 00 1F 3E 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Extended} Cmd1: EX Get/Set Cmd2: 00 01 01 00 00 20 00 1C 01 00 00 00 1F 3E 00
                      4/6/2012 6:25:48 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:25:48 PM - Insteon - ..Got junk instead of ACK/NAK for command 03 1B B0 4C 1F 2E 00 80 80 00 00 00 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:25:48 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:25:48 PM - Insteon - Transmit failed to device 1B.B0.4C for cmd 00 00 00 1B B0 4C 1F 2E 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 after 5 tries.
                      4/6/2012 6:25:48 PM - Insteon - Reading remote link database record #1...
                      4/6/2012 6:25:48 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:25:48 PM - Insteon - PLMBuffer_Clean - Cleared: 50 1B B0 4C 0E DA 13 2B 2E to locate next possible STX
                      4/6/2012 6:25:49 PM - Insteon - ..Got junk instead of ACK/NAK for command FC 15 02 51 1B B0 4C 0E DA 13 11 2E 00 01 01 00 00 20 00 1C 01 00 00
                      4/6/2012 6:25:49 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:49 PM - Insteon - PLMBuffer_Clean - Cleared: 00 00 1F 3E to locate next possible STX
                      4/6/2012 6:25:49 PM - Insteon - ..Got junk instead of ACK/NAK for command 03 62 1B B8 4C 1F 2F 00 00 00 0F 61 41 40 40 40 40 40 40 40 40 F0 00
                      4/6/2012 6:25:49 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:49 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 2B 2F 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Ack/Dir} Cmd1: R/W ALDB Cmd2: 00
                      4/6/2012 6:25:49 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:25:50 PM - Insteon - ..Got junk instead of ACK/NAK for command FE 15 02 51 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E DA 00
                      4/6/2012 6:25:50 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:50 PM - Insteon - PLMBuffer_Clean - Cleared: FF 1C 00 to locate next possible STX
                      4/6/2012 6:25:51 PM - Insteon - ..Got junk instead of ACK/NAK for command 82 9B B0 4C 1F BF 80 80 80 0F FF 01 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:25:51 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:51 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 2B 2F 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Ack/Dir} Cmd1: R/W ALDB Cmd2: 00
                      4/6/2012 6:25:51 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:25:51 PM - Insteon - ..Got junk instead of ACK/NAK for command 9F 15 02 51 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E DA 00
                      4/6/2012 6:25:51 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:25:51 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:25:51 PM - Insteon - PLMBuffer_Clean - Cleared: FF 1C 00 to locate next possible STX
                      4/6/2012 6:25:51 PM - Insteon - ..Got junk instead of ACK/NAK for command C3 F3 1B B0 4C 1F 2F 00 00 00 0F FF 48 78 60 40 40 40 40 40 40 40 00
                      4/6/2012 6:25:51 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:52 PM - Insteon - ..Got junk instead of ACK/NAK for command C7 15 02 50 1B B0 4C 0E DA 13 2B 2F 00 02 51 1B B0 4C 0E DA 13 11 00
                      4/6/2012 6:25:52 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:52 PM - Insteon - PLMBuffer_Clean - Cleared: 00 00 01 01 0F FF 01 A2 00 0E DA 13 FF 1C 00 to locate next possible STX
                      4/6/2012 6:25:53 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 62 DB F0 4C 9F 3F 40 F8 FF 01 00 00 00 00 00 00 00 00 00 06 02 00
                      4/6/2012 6:25:53 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:53 PM - Insteon - PLMBuffer_Clean - Cleared: 00 1B B0 4C 0E DA 13 2B 2F to locate next possible STX
                      4/6/2012 6:25:53 PM - Insteon - ..Got NAK from the PLM for command
                      4/6/2012 6:25:53 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:53 PM - Insteon - PLMBuffer_Clean - Cleared: 00 1C 00 to locate next possible STX
                      4/6/2012 6:25:54 PM - Insteon - ..Got junk instead of ACK/NAK for command FF 6D C1 4C 1F 2F 00 F8 01 00 00 00 00 00 00 00 00 00 06 02 50 1B 00
                      4/6/2012 6:25:54 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:25:54 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:25:54 PM - Insteon - PLMBuffer_Clean - Cleared: 00 4C 0E DA 13 2B 2F 00 to locate next possible STX
                      4/6/2012 6:25:54 PM - Insteon - Received STX 0x51 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E DA 13 FF 1C 00 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Extended} Cmd1: R/W ALDB Cmd2: 00 01 01 0F FF 01 A2 00 0E DA 13 FF 1C 00 00
                      4/6/2012 6:25:54 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:25:54 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 FE 23 3E EA F4 02 02 02 7A FE FF 01 00 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:25:54 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:55 PM - Insteon - ..Got junk instead of ACK/NAK for command 9F 15 02 50 1B B0 4C 0E DA 13 2B 2F 00 02 51 1B B0 4C 0E DA 13 11 00
                      4/6/2012 6:25:55 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:55 PM - Insteon - PLMBuffer_Clean - Cleared: 00 01 01 0F FF 01 A2 00 0E DA 13 FF 1C 00 to locate next possible STX
                      4/6/2012 6:25:56 PM - Insteon - ..Got junk instead of ACK/NAK for command FF 33 3F EA FE 03 03 03 7B FE 70 60 40 40 40 40 40 40 40 40 F0 02 00
                      4/6/2012 6:25:56 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:56 PM - Insteon - PLMBuffer_Clean - Cleared: 00 1B B0 4C 0E DA 13 2B 2F to locate next possible STX
                      4/6/2012 6:25:56 PM - Insteon - ..Got NAK from the PLM for command
                      4/6/2012 6:25:56 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:56 PM - Insteon - PLMBuffer_Clean - Cleared: 00 1C 00 to locate next possible STX
                      4/6/2012 6:25:57 PM - Insteon - ..Got junk instead of ACK/NAK for command 02 62 1B B0 CC 1F 2F F0 F8 C0 00 00 00 00 00 00 00 06 02 50 1B B0 00
                      4/6/2012 6:25:57 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:25:57 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:25:57 PM - Insteon - PLMBuffer_Clean - Cleared: 00 0E DA 13 2B 2F to locate next possible STX
                      4/6/2012 6:25:57 PM - Insteon - ..Got junk instead of ACK/NAK for command C7 15 02 51 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E DA 00
                      4/6/2012 6:25:57 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:58 PM - Insteon - PLMBuffer_Clean - Cleared: 00 FF 1C 00 to locate next possible STX
                      4/6/2012 6:25:58 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 62 1B F8 4C FE 03 03 03 7F FF C0 02 02 02 02 02 02 32 FE 02 50 00
                      4/6/2012 6:25:58 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:58 PM - Insteon - PLMBuffer_Clean - Cleared: 00 B0 4C 0E DA 13 2B 2F to locate next possible STX
                      4/6/2012 6:25:59 PM - Insteon - ..Got NAK from the PLM for command
                      4/6/2012 6:25:59 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:25:59 PM - Insteon - PLMBuffer_Clean - Cleared: 00 FF 1C 00 to locate next possible STX
                      4/6/2012 6:25:59 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 62 1B F0 4C 1F 2F 80 00 00 0F FF 40 60 40 40 40 40 40 40 40 40 00
                      4/6/2012 6:25:59 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:00 PM - Insteon - ..Got junk instead of ACK/NAK for command 1D 15 02 50 1B B0 4C 0E DA 13 2B 2F 00 02 51 1B B0 4C 0E DA 13 11 00
                      4/6/2012 6:26:00 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:00 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:26:00 PM - Insteon - PLMBuffer_Clean - Cleared: 00 00 01 01 0F FF 01 A2 00 0E DA 13 FF 1C to locate next possible STX
                      4/6/2012 6:26:00 PM - Insteon - PLMBuffer_Clean - Cleared: 00 to locate next possible STX
                      4/6/2012 6:26:01 PM - Insteon - ..Got junk instead of ACK/NAK for command 1F E7 15 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:01 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:02 PM - Insteon - ..Got junk instead of ACK/NAK for command E1 33 37 FB F4 02 02 02 7A FE FF 01 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:26:02 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:02 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 2B 2F 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Ack/Dir} Cmd1: R/W ALDB Cmd2: 00
                      4/6/2012 6:26:02 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:26:02 PM - Insteon - ..Got NAK from the PLM for command
                      4/6/2012 6:26:02 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:02 PM - Insteon - PLMBuffer_Clean - Cleared: 1C 00 to locate next possible STX
                      4/6/2012 6:26:03 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 B1 23 3E EA F4 02 02 02 7A FA 01 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:26:03 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:03 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 2B 2F 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Ack/Dir} Cmd1: R/W ALDB Cmd2: 00
                      4/6/2012 6:26:03 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:26:03 PM - Insteon - ..Got junk instead of ACK/NAK for command F1 02 51 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E DA 13 00
                      4/6/2012 6:26:03 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:03 PM - Insteon - Transmit failed to device 1B.B0.4C for cmd 00 00 00 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 after 5 tries.
                      4/6/2012 6:26:03 PM - Insteon - Failed to get remote link database record for Insteon device 1B.B0.4C record #1.
                      4/6/2012 6:26:03 PM - Insteon - Reading remote link database record #1, attempt #2...
                      4/6/2012 6:26:03 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:26:03 PM - Insteon - PLMBuffer_Clean - Cleared: 1C 00 00 to locate next possible STX
                      4/6/2012 6:26:04 PM - Insteon - ..Got junk instead of ACK/NAK for command 8B 1B B0 4C 1F 2F 84 84 80 0F 40 40 40 40 40 40 40 40 40 40 F0 02 00
                      4/6/2012 6:26:04 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:04 PM - Insteon - PLMBuffer_Clean - Cleared: 15 1B B0 4C 0E DA 13 2B 2F to locate next possible STX
                      4/6/2012 6:26:04 PM - Insteon - ..Got junk instead of ACK/NAK for command F3 15 02 51 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E DA 00
                      4/6/2012 6:26:04 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:04 PM - Insteon - PLMBuffer_Clean - Cleared: 00 FF 1C 00 to locate next possible STX
                      4/6/2012 6:26:05 PM - Insteon - ..Got junk instead of ACK/NAK for command FF 6D C1 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:26:05 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:05 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 2B 2F 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Ack/Dir} Cmd1: R/W ALDB Cmd2: 00
                      4/6/2012 6:26:05 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:26:05 PM - Insteon - ..Got NAK from the PLM for command
                      4/6/2012 6:26:05 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:05 PM - Insteon - PLMBuffer_Clean - Cleared: 1C 00 to locate next possible STX
                      4/6/2012 6:26:05 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 D6 04 63 7F BD 01 01 01 3D FF FF 01 00 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:05 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:05 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:26:06 PM - Insteon - ..Got NAK from the PLM for command
                      4/6/2012 6:26:06 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:07 PM - Insteon - PLMBuffer_Clean - Cleared: 00 2F 00 01 01 0F FF 01 A2 00 0E DA 13 FF 1C 00 to locate next possible STX
                      4/6/2012 6:26:07 PM - Insteon - ..Got junk instead of ACK/NAK for command 81 B1 23 3E EA F4 03 FE F8 81 60 60 40 40 40 40 40 40 F0 02 50 1B 00
                      4/6/2012 6:26:07 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:07 PM - Insteon - PLMBuffer_Clean - Cleared: 00 4C 0E DA 13 2B 2F to locate next possible STX
                      4/6/2012 6:26:08 PM - Insteon - ..Got junk instead of ACK/NAK for command FE 15 02 51 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E DA 00
                      4/6/2012 6:26:08 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:08 PM - Insteon - PLMBuffer_Clean - Cleared: 00 FF 1C 00 to locate next possible STX
                      4/6/2012 6:26:08 PM - Insteon - ..Got junk instead of ACK/NAK for command D3 7F C1 4C 1F 2F F0 E8 C0 10 30 20 20 20 20 20 20 F0 02 50 1B B0 00
                      4/6/2012 6:26:08 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:08 PM - Insteon - PLMBuffer_Clean - Cleared: 00 0E DA 13 2B 2F to locate next possible STX
                      4/6/2012 6:26:09 PM - Insteon - ..Got junk instead of ACK/NAK for command E7 15 02 51 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E DA 00
                      4/6/2012 6:26:09 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:09 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:26:09 PM - Insteon - PLMBuffer_Clean - Cleared: 00 FF 1C 00 to locate next possible STX
                      4/6/2012 6:26:10 PM - Insteon - ..Got junk instead of ACK/NAK for command C3 D6 04 63 7D FF 01 01 01 3D FD 01 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:26:10 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:10 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 2B 2F 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Ack/Dir} Cmd1: R/W ALDB Cmd2: 00
                      4/6/2012 6:26:10 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:26:10 PM - Insteon - ..Got junk instead of ACK/NAK for command F1 15 02 51 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E DA 00
                      4/6/2012 6:26:10 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:10 PM - Insteon - PLMBuffer_Clean - Cleared: FF 1C 00 to locate next possible STX
                      4/6/2012 6:26:11 PM - Insteon - ..Got junk instead of ACK/NAK for command FE 1F B0 4E 9F 2F C0 A0 0F FF 01 00 00 00 00 00 00 00 00 00 06 02 00
                      4/6/2012 6:26:11 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:11 PM - Insteon - PLMBuffer_Clean - Cleared: 00 1B B0 4C 0E DA 13 2B 2F to locate next possible STX
                      4/6/2012 6:26:11 PM - Insteon - ..Got NAK from the PLM for command
                      4/6/2012 6:26:11 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:11 PM - Insteon - PLMBuffer_Clean - Cleared: 00 1C 00 to locate next possible STX
                      4/6/2012 6:26:12 PM - Insteon - ..Got junk instead of ACK/NAK for command F7 6D C1 4C 1F 3F 14 14 00 0F FF E0 00 00 00 00 00 00 06 02 50 1B 00
                      4/6/2012 6:26:12 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:12 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:26:12 PM - Insteon - PLMBuffer_Clean - Cleared: 00 4C 0E DA 13 2B 2F to locate next possible STX
                      4/6/2012 6:26:12 PM - Insteon - ..Got junk instead of ACK/NAK for command FC 15 02 51 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E DA 00
                      4/6/2012 6:26:12 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:12 PM - Insteon - PLMBuffer_Clean - Cleared: 00 FF 1C 00 to locate next possible STX
                      4/6/2012 6:26:13 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:26:13 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:13 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 2B 2F 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Ack/Dir} Cmd1: R/W ALDB Cmd2: 00
                      4/6/2012 6:26:13 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:26:13 PM - Insteon - ..Got junk instead of ACK/NAK for command F5 FC 15 02 51 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E 00
                      4/6/2012 6:26:13 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:13 PM - Insteon - PLMBuffer_Clean - Cleared: 13 FF 1C 00 to locate next possible STX
                      4/6/2012 6:26:14 PM - Insteon - ..Got junk instead of ACK/NAK for command FF 04 63 7F BD 01 01 01 3D FF FF 01 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:26:14 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:14 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 2B 2F 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Ack/Dir} Cmd1: R/W ALDB Cmd2: 00
                      4/6/2012 6:26:14 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:26:14 PM - Insteon - ..Got junk instead of ACK/NAK for command F1 15 02 51 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E DA 00
                      4/6/2012 6:26:14 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:14 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:26:14 PM - Insteon - PLMBuffer_Clean - Cleared: FF 1C 00 to locate next possible STX
                      4/6/2012 6:26:15 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 F3 1B F8 CC 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:15 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:15 PM - Insteon - ..Got NAK from the PLM for command
                      4/6/2012 6:26:15 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:15 PM - Insteon - PLMBuffer_Clean - Cleared: 00 01 01 0F FF 01 A2 00 0E DA 13 FF 1C 00 to locate next possible STX
                      4/6/2012 6:26:16 PM - Insteon - ..Got junk instead of ACK/NAK for command A3 FE 23 3E EA F4 02 02 02 7A FA 01 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:26:16 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:16 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 2B 2F 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Ack/Dir} Cmd1: R/W ALDB Cmd2: 00
                      4/6/2012 6:26:16 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:26:17 PM - Insteon - ..Got junk instead of ACK/NAK for command FE 15 02 51 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E DA 00
                      4/6/2012 6:26:17 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:17 PM - Insteon - PLMBuffer_Clean - Cleared: FF 1C 00 to locate next possible STX
                      4/6/2012 6:26:17 PM - Insteon - ..Got junk instead of ACK/NAK for command FF 1B F0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:26:17 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:17 PM - Insteon - Transmit failed to device 1B.B0.4C for cmd 00 00 00 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 after 5 tries.
                      4/6/2012 6:26:17 PM - Insteon - Failed to get remote link database record for Insteon device 1B.B0.4C record #1.
                      4/6/2012 6:26:17 PM - Insteon - Reading remote link database record #1, attempt #3...
                      4/6/2012 6:26:17 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:26:17 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 2B 2F 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Ack/Dir} Cmd1: R/W ALDB Cmd2: 00
                      4/6/2012 6:26:17 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:26:18 PM - Insteon - ..Got junk instead of ACK/NAK for command C5 FE 15 02 51 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E 00
                      4/6/2012 6:26:18 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:18 PM - Insteon - PLMBuffer_Clean - Cleared: 13 FF 1C 00 to locate next possible STX
                      4/6/2012 6:26:18 PM - Insteon - ..Got junk instead of ACK/NAK for command FF B1 23 3E FF FE 02 E8 01 00 00 00 00 00 00 00 00 00 06 02 50 1B 00
                      4/6/2012 6:26:18 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:18 PM - Insteon - PLMBuffer_Clean - Cleared: 00 4C 0E DA 13 2B 2F to locate next possible STX
                      4/6/2012 6:26:19 PM - Insteon - ..Got junk instead of ACK/NAK for command FE FE 15 02 51 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E 00
                      4/6/2012 6:26:19 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:19 PM - Insteon - PLMBuffer_Clean - Cleared: 00 13 FF 1C 00 to locate next possible STX
                      4/6/2012 6:26:19 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 F3 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:19 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:20 PM - Insteon - ..Got junk instead of ACK/NAK for command F1 15 02 50 1B B0 4C 0E DA 13 2B 2F 00 02 51 1B B0 4C 0E DA 13 11 00
                      4/6/2012 6:26:20 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:20 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:26:20 PM - Insteon - PLMBuffer_Clean - Cleared: 00 00 01 01 0F FF 01 A2 00 0E DA 13 FF 1C 00 to locate next possible STX
                      4/6/2012 6:26:21 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:26:21 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:21 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 2B 2F 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Ack/Dir} Cmd1: R/W ALDB Cmd2: 00
                      4/6/2012 6:26:21 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:26:21 PM - Insteon - ..Got NAK from the PLM for command
                      4/6/2012 6:26:21 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:21 PM - Insteon - PLMBuffer_Clean - Cleared: 1C 00 to locate next possible STX
                      4/6/2012 6:26:21 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 AC 23 3E FF FE 03 02 03 79 FE FF 01 00 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:21 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:22 PM - Insteon - ..Got NAK from the PLM for command
                      4/6/2012 6:26:22 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:22 PM - Insteon - PLMBuffer_Clean - Cleared: 00 01 01 0F FF 01 A2 00 0E DA 13 FF 1C to locate next possible STX
                      4/6/2012 6:26:22 PM - Insteon - PLMBuffer_Clean - Cleared: 00 to locate next possible STX
                      4/6/2012 6:26:23 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 1B F0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:26:23 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:23 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:26:23 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 2B 2F 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Ack/Dir} Cmd1: R/W ALDB Cmd2: 00
                      4/6/2012 6:26:23 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:26:23 PM - Insteon - ..Got junk instead of ACK/NAK for command F1 15 02 51 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E DA 00
                      4/6/2012 6:26:23 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:23 PM - Insteon - PLMBuffer_Clean - Cleared: FF 1C 00 to locate next possible STX
                      4/6/2012 6:26:24 PM - Insteon - ..Got junk instead of ACK/NAK for command FF 04 63 7D BD 01 01 01 3D FF FF 01 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:26:24 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:24 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 2B 2F 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Ack/Dir} Cmd1: R/W ALDB Cmd2: 00
                      4/6/2012 6:26:24 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:26:24 PM - Insteon - ..Got junk instead of ACK/NAK for command FC FF 15 02 51 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E 00
                      4/6/2012 6:26:24 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:24 PM - Insteon - PLMBuffer_Clean - Cleared: 13 FF 1C 00 to locate next possible STX
                      4/6/2012 6:26:25 PM - Insteon - ..Got junk instead of ACK/NAK for command 81 B1 23 3E EA F4 07 F6 E8 48 48 40 40 40 40 40 40 40 40 F0 02 50 00
                      4/6/2012 6:26:25 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:25 PM - Insteon - PLMBuffer_Clean - Cleared: 00 B0 4C 0E DA 13 2B 2F to locate next possible STX
                      4/6/2012 6:26:25 PM - Insteon - ..Got junk instead of ACK/NAK for command 81 DE 23 3E CA 68 37 9C F4 02 0A FE 01 0F FF 01 A2 00 0E DA 13 FF 00
                      4/6/2012 6:26:25 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:25 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:26:26 PM - Insteon - PLMBuffer_Clean - Cleared: 00 00 00 to locate next possible STX
                      4/6/2012 6:26:26 PM - Insteon - ..Got junk instead of ACK/NAK for command CB 63 1B B0 4C 1F 2F 00 00 00 0F FF 40 44 40 40 40 40 40 40 40 40 00
                      4/6/2012 6:26:26 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:26 PM - Insteon - ..Got junk instead of ACK/NAK for command C5 E7 15 02 50 1B B0 4C 0E DA 13 2B 2F 00 02 51 1B B0 4C 0E DA 13 00
                      4/6/2012 6:26:26 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:26 PM - Insteon - PLMBuffer_Clean - Cleared: 15 2F 00 01 01 0F FF 01 A2 00 0E DA 13 FF 1C to locate next possible STX
                      4/6/2012 6:26:26 PM - Insteon - PLMBuffer_Clean - Cleared: 00 to locate next possible STX
                      4/6/2012 6:26:27 PM - Insteon - ..Got junk instead of ACK/NAK for command FF 6D E1 6E 1F 2F 00 88 00 0F FF 01 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:26:27 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:27 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 2B 2F 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Ack/Dir} Cmd1: R/W ALDB Cmd2: 00
                      4/6/2012 6:26:27 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:26:28 PM - Insteon - ..Got junk instead of ACK/NAK for command FE 15 02 51 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E DA 00
                      4/6/2012 6:26:28 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:28 PM - Insteon - PLMBuffer_Clean - Cleared: FF 1C 00 to locate next possible STX
                      4/6/2012 6:26:28 PM - Insteon - ..Got junk instead of ACK/NAK for command BF 33 3F EF FE 03 03 00 0F FF 01 00 00 00 00 00 00 00 00 00 06 02 00
                      4/6/2012 6:26:28 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:28 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:26:28 PM - Insteon - PLMBuffer_Clean - Cleared: 00 1B B0 4C 0E DA 13 2B 2F to locate next possible STX
                      4/6/2012 6:26:29 PM - Insteon - ..Got NAK from the PLM for command
                      4/6/2012 6:26:29 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:29 PM - Insteon - PLMBuffer_Clean - Cleared: 00 1C 00 to locate next possible STX
                      4/6/2012 6:26:29 PM - Insteon - ..Got junk instead of ACK/NAK for command 03 7F E1 4C 1F 3F 00 80 02 0F FF 60 60 40 40 40 40 40 40 40 40 F0 00
                      4/6/2012 6:26:29 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:29 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 2B 2F 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Ack/Dir} Cmd1: R/W ALDB Cmd2: 00
                      4/6/2012 6:26:29 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:26:30 PM - Insteon - ..Got NAK from the PLM for command
                      4/6/2012 6:26:30 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:30 PM - Insteon - PLMBuffer_Clean - Cleared: 1C 00 to locate next possible STX
                      4/6/2012 6:26:31 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 1B B0 4C 1F 3F 00 00 00 0F 60 40 40 40 40 40 40 40 40 40 F0 02 00
                      4/6/2012 6:26:31 PM - Insteon - PLMBuffer_Clean - Cleared: 00 1B B0 4C 0E DA 13 2B 2F to locate next possible STX
                      4/6/2012 6:26:31 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:31 PM - Insteon - ..Got junk instead of ACK/NAK for command E7 FE 15 02 51 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E 00
                      4/6/2012 6:26:31 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:31 PM - Insteon - Transmit failed to device 1B.B0.4C for cmd 00 00 00 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 after 5 tries.
                      4/6/2012 6:26:31 PM - Insteon - Failed to get remote link database record for Insteon device 1B.B0.4C record #1.
                      4/6/2012 6:26:31 PM - Insteon - Reading remote link database record #1, attempt #4...
                      4/6/2012 6:26:31 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:26:31 PM - Insteon - PLMBuffer_Clean - Cleared: 00 13 FF 1C 00 to locate next possible STX
                      4/6/2012 6:26:32 PM - Insteon - ..Got junk instead of ACK/NAK for command F3 1B B0 4C 1F 3F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:26:32 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:32 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 2B 2F 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Ack/Dir} Cmd1: R/W ALDB Cmd2: 00
                      4/6/2012 6:26:32 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:26:32 PM - Insteon - ..Got junk instead of ACK/NAK for command FE 15 02 51 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E DA 00
                      4/6/2012 6:26:32 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:32 PM - Insteon - PLMBuffer_Clean - Cleared: FF 1C 00 to locate next possible STX
                      4/6/2012 6:26:33 PM - Insteon - ..Got junk instead of ACK/NAK for command C5 C5 15 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:33 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:34 PM - Insteon - ..Got junk instead of ACK/NAK for command FF 7F C1 4C 1F 2F A0 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:26:34 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:34 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 2B 2F 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Ack/Dir} Cmd1: R/W ALDB Cmd2: 00
                      4/6/2012 6:26:34 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:26:34 PM - Insteon - ..Got junk instead of ACK/NAK for command FE 15 02 51 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E DA 00
                      4/6/2012 6:26:34 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:34 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:26:34 PM - Insteon - PLMBuffer_Clean - Cleared: FF 1C 00 to locate next possible STX
                      4/6/2012 6:26:35 PM - Insteon - ..Got junk instead of ACK/NAK for command 03 62 1B B0 4C 1F 2F 80 00 00 0F FF 62 FE 88 00 00 00 00 00 06 02 00
                      4/6/2012 6:26:35 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:35 PM - Insteon - PLMBuffer_Clean - Cleared: 00 1B B0 4C 0E DA 13 2B 2F to locate next possible STX
                      4/6/2012 6:26:35 PM - Insteon - ..Got junk instead of ACK/NAK for command C5 15 02 51 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E DA 00
                      4/6/2012 6:26:35 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:36 PM - Insteon - PLMBuffer_Clean - Cleared: 00 FF 1C 00 to locate next possible STX
                      4/6/2012 6:26:36 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 F3 1F B8 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:36 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:37 PM - Insteon - ..Got junk instead of ACK/NAK for command C5 15 02 50 1B B0 4C 0E DA 13 2B 2F 00 02 51 1B B0 4C 0E DA 13 11 00
                      4/6/2012 6:26:37 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:37 PM - Insteon - PLMBuffer_Clean - Cleared: 00 00 01 01 0F FF 01 A2 00 0E DA 13 FF 1C to locate next possible STX
                      4/6/2012 6:26:37 PM - Insteon - PLMBuffer_Clean - Cleared: 00 to locate next possible STX
                      4/6/2012 6:26:37 PM - Insteon - ..Got junk instead of ACK/NAK for command FF 6F C1 4C 1F BF 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 06 00
                      4/6/2012 6:26:37 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:37 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:26:37 PM - Insteon - Received STX 0x50 (Raw Insteon Rec):01 1B B0 4C 0E DA 13 2B 2F 00 - Event: New msg for PLM, Src[1B.B0.4C] Dst[0E.DA.13] {Ack/Dir} Cmd1: R/W ALDB Cmd2: 00
                      4/6/2012 6:26:37 PM - Insteon - Received message from Front Porch Tap-Added SwitchLinc V2 600W Dimmer 0 (1B.B0.4C) taking hops: 1
                      4/6/2012 6:26:38 PM - Insteon - ..Got junk instead of ACK/NAK for command C5 C5 15 02 51 1B B0 4C 0E DA 13 11 2F 00 01 01 0F FF 01 A2 00 0E 00
                      4/6/2012 6:26:38 PM - Insteon - ..Retry #1 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:38 PM - Insteon - PLMBuffer_Clean - Cleared: 13 FF 1C 00 to locate next possible STX
                      4/6/2012 6:26:39 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 F3 1B F8 CC 1F 2F 00 80 80 F8 F0 80 00 00 00 00 00 00 06 02 50 00
                      4/6/2012 6:26:39 PM - Insteon - ..Retry #2 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:39 PM - Insteon - PLMBuffer_Clean - Cleared: 00 B0 4C 0E DA 13 2B 2F to locate next possible STX
                      4/6/2012 6:26:39 PM - Insteon - ..Got junk instead of ACK/NAK for command 02 F9 33 3F CA 48 37 14 F4 02 0A FE 01 0F FF 01 A2 00 0E DA 13 FF 00
                      4/6/2012 6:26:39 PM - Insteon - ..Retry #3 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:39 PM - Insteon - PLMBuffer_Clean - Cleared: 00 00 00 to locate next possible STX
                      4/6/2012 6:26:39 PM - Insteon - ..Got junk instead of ACK/NAK for command 83 F3 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:39 PM - Insteon - ..Retry #4 required. Pausing 250ms for PLM to clear...
                      4/6/2012 6:26:40 PM - Insteon - ..Got junk instead of ACK/NAK for command F9 F9 15 02 50 1B B0 4C 0E DA 13 2B 2F 00 02 51 1B B0 4C 0E DA 13 00
                      4/6/2012 6:26:40 PM - Insteon - **Internal transmit attempt failed for CMD: 00 00 00 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00
                      4/6/2012 6:26:40 PM - Insteon - Sending command 02 62 1B B0 4C 1F 2F 00 00 00 0F FF 01 00 00 00 00 00 00 00 00 00 to PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False
                      4/6/2012 6:26:40 PM - Insteon - PLMBuffer_Clean - Cleared: 15 2F 00 01 01 0F FF 01 A2 00 0E DA 13 FF 1C 00 to locate next possible STX

                      Comment


                        #71
                        can you tell me what you have for the following settings on the config page?
                        Number of retries on communication failure
                        No Response Timeout for devices

                        i think you have it set at 4 & 1.

                        I would suggest 3 & 3

                        also set Insteon Hops Allowed to 4
                        Mark

                        HS3 Pro 4.2.19.5
                        Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
                        Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
                        Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

                        Comment


                          #72
                          Sorry for the delay. I was admittedly very frustrated as things were unfolding:

                          After leaving the breaker in question off for almost 8 hours, i turned it back on. My insteon relay up in the ceiling lost its memory, deleted its link table, and set itself to ON. This means my bathroom fan could not be controlled and was stuck on.
                          I toggled the breaker again, this time the keypadlinc failed and only came on with a very very dull backlight and would not respond at all. Left breaker off again for a few hours and the keypadlinc is seemingly working and i can control the relay via the PLM only.

                          ANYWAY:

                          It appears the master bathroom devices are wreaking havoc on my network, and themselves. I tried previously moving the PLM to two other outlets and still experienced the failures shown. I then decide to do a fresh homeseer demo install on another machine and moved the PLM to another room. It was able to make contact with the pesky new switches immediately. I then connected the PLM to my prior/current homeseer box, without moving the PLM, and it too was able to communicate with everything.

                          I apologize for wasting your time on this - very frustrating here between SH telling me the new switches were i2cs; and them not working in HS, and SH providing me no means to do a baseline test.

                          I am currently running 1.7.0.1 with no issues. I do know that 1.7.0.10 was constantly getting stuck and trying to restart the PLM connection and never succeeded. Not sure if you want me to try and reproduce that.

                          Comment


                            #73
                            Originally posted by oztiks View Post
                            Sorry for the delay. I was admittedly very frustrated as things were unfolding:

                            After leaving the breaker in question off for almost 8 hours, i turned it back on. My insteon relay up in the ceiling lost its memory, deleted its link table, and set itself to ON. This means my bathroom fan could not be controlled and was stuck on.
                            I toggled the breaker again, this time the keypadlinc failed and only came on with a very very dull backlight and would not respond at all. Left breaker off again for a few hours and the keypadlinc is seemingly working and i can control the relay via the PLM only.

                            ANYWAY:

                            It appears the master bathroom devices are wreaking havoc on my network, and themselves. I tried previously moving the PLM to two other outlets and still experienced the failures shown. I then decide to do a fresh homeseer demo install on another machine and moved the PLM to another room. It was able to make contact with the pesky new switches immediately. I then connected the PLM to my prior/current homeseer box, without moving the PLM, and it too was able to communicate with everything.

                            I apologize for wasting your time on this - very frustrating here between SH telling me the new switches were i2cs; and them not working in HS, and SH providing me no means to do a baseline test.

                            I am currently running 1.7.0.1 with no issues. I do know that 1.7.0.10 was constantly getting stuck and trying to restart the PLM connection and never succeeded. Not sure if you want me to try and reproduce that.
                            Sounds like you are making progress which is good. So now instead of cutting the breaker, try just pulling the set on your switchlincs to just kill power to the individual devices until you figure out which one is causing the problem. If its not a switch, check your electronics: tv, STBs, wall adapters, etc. Might need a filter or two.

                            I had a similar problem in my master suite as well. One switchlinc was stuck in RF transmit mode so it was drowning out all other RF comm in the suite and my garage below. Took me months to figure this out. I understand your frustration.

                            I'll check on the restart issue in 1.7.0.10

                            If you can, locate your PLM near your service panel. I saw a dramatic improvement in my stats after i did this.

                            Only one question: did you increase the "Response Timeout", did that help cleanup the JUNK msgs, etc.? or maybe they are just related to the noise/signal issue.
                            Mark

                            HS3 Pro 4.2.19.5
                            Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
                            Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
                            Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

                            Comment


                              #74
                              Ver 1.7 & Insteon Sensor (2420M)

                              I've received a batch of new Insteon sensors (2420M) that are i2cs protocol. On the older version of the PLM Plug-In, I could change operating flags and custom settings for the older versions of the sensors (i2 protocol), but on the new i2cs sensors those options were not in the interface.

                              I switched to the new 1.7 version, and I can now see these options in the interface for i2cs protocol sensors, but when I update them they do not actually save to the sensor, even after going into linking mode and/or having sensor send ON signals. Appreciate any help available.

                              Comment


                                #75
                                Originally posted by SQLGOD View Post
                                I've received a batch of new Insteon sensors (2420M) that are i2cs protocol. On the older version of the PLM Plug-In, I could change operating flags and custom settings for the older versions of the sensors (i2 protocol), but on the new i2cs sensors those options were not in the interface.

                                I switched to the new 1.7 version, and I can now see these options in the interface for i2cs protocol sensors, but when I update them they do not actually save to the sensor, even after going into linking mode and/or having sensor send ON signals. Appreciate any help available.
                                do you see any log entries from the plugin trying to program the MS after an ON is received? Can you enable detailed logging and post what you get
                                Mark

                                HS3 Pro 4.2.19.5
                                Hardware: Insteon Serial PLM | AD2USB for Vista Alarm | HAI Omnistat2 | 1-Wire HA7E | RFXrec433 | Dahua Cameras | LiftMaster Internet Gateway | Tuya Smart Plugs
                                Plugins: Insteon (mine) | Vista Alarm (mine) | Omnistat 3 | Ultra1Wire3 | RFXCOM | HS MyQ | BLRadar | BLDenon | Tuya | Jon00 Charting | Jon00 Links
                                Platform: Windows Server 2022 Standard, i5-12600K/3.7GHz/10 core, 16GB RAM, 500GB SSD

                                Comment

                                Working...
                                X