ok so i installed BLLan from HS3 and it works. added a few pc's too. I just see that the images folder is missing and i have no default on/off. no real biggie but was curious why it is missing and if you can attached both pics here???
-
HW - i5 4570T @2.9ghz runs @11w | 8gb ram | 128gb ssd OS - Win10 x64
HS - HS3 Pro Edition 3.0.0.435
Plugins - BLRF 2.0.94.0 | Concord 4 3.1.13.10 | HSBuddy 3.9.605.5 | HSTouch Server 3.0.0.68 | RFXCOM 30.0.0.36 | X10 3.0.0.36 | Z-Wave 3.0.1.190
Hardware - EdgePort/4 DB9 Serial | RFXCOM 433MHz USB Transceiver | Superbus 2000 for Concord 4 | TI103 X-10 Interface | WGL Designs W800 RF | Z-Net Z-Wave Interface
-
I will have a look -
OK should be fixed.
Install it again from the HS updater and let me know
I am sure we will run into more of this since this is the first time a lot of the free plugins are in the updaterComment
-
it said update failed.. tried a few times.. the looked at the logs but it copied in the files so i am good..
i found another so will just open a new one for ya
Attached FilesHW - i5 4570T @2.9ghz runs @11w | 8gb ram | 128gb ssd OS - Win10 x64
HS - HS3 Pro Edition 3.0.0.435
Plugins - BLRF 2.0.94.0 | Concord 4 3.1.13.10 | HSBuddy 3.9.605.5 | HSTouch Server 3.0.0.68 | RFXCOM 30.0.0.36 | X10 3.0.0.36 | Z-Wave 3.0.1.190
Hardware - EdgePort/4 DB9 Serial | RFXCOM 433MHz USB Transceiver | Superbus 2000 for Concord 4 | TI103 X-10 Interface | WGL Designs W800 RF | Z-Net Z-Wave Interface
Comment
-
-
Did it say what it failed on?Comment
-
I just installed it here and it was successfulComment
Comment