Discussions related to HS3 build 3.0.0.362

[rjh]

This thread is for discussions related to build 3.0.0.362 of HS3.

[stefxx]

The Linux version includes (again!) too many files, overwriting the HomeSeerData.hsd file, settings.ini and other files. Luckily I have a backup...

[rjh]

Dang, I modified the build script to automatically clean the files, I guess it did not work. I cleaned the files and uploaded a new tar file.

The Linux version includes (again!) too many files, overwriting the HomeSeerData.hsd file, settings.ini and other files. Luckily I have a backup...

[andyf]

The Linux version includes (again!) too many files, overwriting the HomeSeerData.hsd file, settings.ini and other files. Luckily I have a backup...

I updated my Linux system from 357 using the updater in Setup. Pandamonium. All of my plug-ins error out. Hung the browser when I tried to disable them, nothing worked.

My last backup was from 10 days on build 350 so not too bad recovering. I guess that since the 357 update went flawlessly I got a little cocky.

[andyf]

Dang, I modified the build script to automatically clean the files, I guess it did not work. I cleaned the files and uploaded a new tar file.

Does this mean I can do the update from the Setup again and it should work?

[rjh]

I see that something is not right, I took down the update and am looking into it.

I updated my Linux system from 357 using the updater in Setup. Pandamonium. All of my plug-ins error out. Hung the browser when I tried to disable them, nothing worked.

My last backup was from 10 days on build 350 so not too bad recovering. I guess that since the 357 update went flawlessly I got a little cocky.

[concordseer]

Too late. Already updated to .362. Plugins disabled and plugin server just aimlessly spinning around.

[rjh]

Just go back to 357, there is a problem with the Scheduler.dll file in 362, no other existing files are corrupted.

Too late. Already updated to .362. Plugins disabled and plugin server just aimlessly spinning around.

[rjh]

The problem with build 362 has been fixed. If you would like to try build 363, the files are uploaded and you can manually update. We are testing and so far it looks good. Will release tomorrow if all looks ok.

[stefxx]

Much better, thank you. However, with 363 I get an error during startup and the error repeats every 25 seconds or so:

08:06:05:3626:[HSTouch Server]->Server started on port 10200
08:06:05:4034:[Startup]->HStouch server started, waiting for clients to connect.
08:06:05:4288:[Web Server]->Local IP address is: x.x.x.x
08:06:05:4349:[Web Server]->Web Server started on port 80
08:06:05:4384:[Web Server]->UPNP Discovery started
08:06:05:4660:[Startup]->Start automation engine...
08:06:05:4707:[Startup]->Initializing Speaker Client Interface
08:06:05:4811:[Speech]->Listening for remote speaker connections on port 10401
08:06:05:4953:[Database]->Opening (Mode=Read/Write) up HomeSeer Energy database /HomeSeer/Data/Energy/Energy.hsd
Program exception: 20-9-2017 08:06:05

Specified cast is not valid.

HomeSeer version: 3.0.0.363

Source: Scheduler

Target: Void cfd126dc22649054e668c25ba373a0e5a(System.Object)


Stack trace:

  at A.ccbdc96391d2f873f9c7f76d835409e30.cfd126dc22649054e668c25ba373a0e5a (System.Object cc1a76d1c59261e22fedcb6b19068e3d5) [0x00000] in <649533d281fe4dfd9808382ecdcd26d7>:0
  at System.Threading.ThreadHelper.ThreadStart_Context (System.Object state) [0x00025] in <204f770036d441bb8dfd3daba3550e83>:0
  at System.Threading.ExecutionContext.RunInternal (System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, System.Object state, System.Boolean prese$
  at System.Threading.ExecutionContext.Run (System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, System.Object state, System.Boolean preserveSyncC$
  at System.Threading.ExecutionContext.Run (System.Threading.ExecutionContext executionContext, System.Threading.ContextCallback callback, System.Object state) [0x0002b] in <204f770036d441$
  at System.Threading.ThreadHelper.ThreadStart (System.Object obj) [0x0000f] in <204f770036d441bb8dfd3daba3550e83>:0




08:06:07:9481:[Startup]->Updater services starting...
08:06:07:9522:[Startup]->Starting Find service...
08:06:07:9623:[Startup]->Powerfail Recovery will take place in 30 Seconds

[jmj09]

Hi
On this specific flavour (HS3:3.0.0.362 on windows10) I experiment a fairly high cpu use about 25% on a fresh boot. It remains constant with time. Very few activity on HS3 engine.
I didnt check for a while, I did it in that case, hearing at my laptop spinning up the fans.

JMJ09

Computer: ASUS K52F
CPU: Intel Core i3-380M (Arrandale SV, K0)
2533 MHz (19.00x133.3)
Motherboard: ASUS K52F
Chipset: Intel HM55 (IbexPeak-M DH)
Memory: 4096 MBytes @ 532 MHz, 7.0-7-7-20
Drive: ST9320325AS, 312.6 GB, Serial ATA 3Gb/s @ 1.5Gb/s
Network: Atheros AR9285 Wireless Network Adapter [AzureWave]
Network: JMicron Technology JMC250 PCI-E Gigabit Ethernet Adapter
OS: Microsoft Windows 10 Professional Build 16288

HS3
Current Date/Time: 20/09/2017 10:33:15
HomeSeer Version: HS3 Pro Edition 3.0.0.362
Operating System: Microsoft Windows 10 Professionnel - Work Station
System Uptime: 0 Days 0 Hours 8 Minutes 22 Seconds
IP Address: 192.168.1.78
Number of Devices: 133
Number of Events: 49
Available Threads: 400

Enabled Plug-Ins
30.0.0.35: RFXCOM
3.0.1.144: Z-Wave

[tCC]

High CPU on my system as well, plugin updater is barely useable, reverting...

[Guest]

Same thing here, high cpu usage

[andyf]

High CPU on my system as well, plugin updater is barely useable, reverting...

I reverted back to 350 and the plug-in updater is still either so slow that I lose patience or not working at all.

[tCC]

You are right, .357 has the same slowness in addon/plugin updates...

But, my CPU usage is back to normal with build 357!