Announcement

Collapse
No announcement yet.

Runing Z-Flash and getting errors

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Runing Z-Flash and getting errors

    Current Date/Time: 11/22/2017 1:40:38 PM
    HomeSeer Version: HS3 Standard Edition 3.0.0.368
    Operating System: Microsoft Windows Embedded Standard - Work Station
    System Uptime: 1 Day 3 Hours 27 Minutes 40 Seconds
    IP Address: 192.168.1.215
    Number of Devices: 271
    Number of Events: 29
    Available Threads: 200

    Enabled Plug-Ins
    3.2.0.5: APCUPSD
    2.0.38.0: BLLAN
    3.0.0.101: LutronCaseta
    3.0.6331.36036: UltraCID3
    3.0.6370.28796: UltraM1G3
    3.0.1.130: Z-Wave

    I receive the following errors when running Z-Flash. The last change I made was installed a new Z-NET as my controller.


    Initializing Z-Wave interface (Ethernet Interface) at 192.168.1.217, port 2001
    Z-Wave Ethernet at IP 192.168.1.217, connected to interface ok.
    Processing data buffered by the interface while it was disconnected.
    Getting node information from controller...
    : Exception transmitting to IP 192.168.1.217: Unable to write data to the transport connection: An established connection was aborted by the software in your host machine.
    Z-Wave Ethernet at IP 192.168.1.217, connected to interface ok.
    Processing data buffered by the interface while it was disconnected.
    Getting node information from controller...
    : The interface did not respond to the request for the HomeID and Node - it may be disconnected or malfunctioning (2).
    Trying to re-connect to Ethernet interface at IP 192.168.1.217...
    Init Done.
Working...
X