I've got an Aeon S2 USB z-stick (DSA02203-ZWUS) that I'd like to get up and running with my HS3 Pro setup running on a Windows 10 machine. Plugged it in, saw that it needed a CP2102 driver, downloaded that from Silicon Labs and it comes up on COM3
I loaded the Z-wave plug-in into HS3 (v3.0.1.190) and then set up a Controller in the plug-in and used the "Aeon Labs Aeotec Z-stick" on COM3.
It brought up the plug-in dialog but complained:
I did search and saw various things about USB connections. Tried it straight into the CPU, into powered hub, an un-powered hub, another hub, a different port on the CPU, etc. Same problem on any connection.
My goal here is to move a bunch of z-wave sensors off a SmartThings hub. And likely everything else too. But just the sensors to start.
What am I missing? What settings or drivers should I be using?
I loaded the Z-wave plug-in into HS3 (v3.0.1.190) and then set up a Controller in the plug-in and used the "Aeon Labs Aeotec Z-stick" on COM3.
It brought up the plug-in dialog but complained:
Code:
Connecting to server at 127.0.0.1... Connected, waiting to be initialized... Z-Wave Plugin: OS Type is Windows Error opening com port: The maximum baud rate for the device is 9598. Parameter name: baudRate Trace: at System.IO.Ports.SerialStream..ctor(String portName, Int32 baudRate, Parity parity, Int32 dataBits, StopBits stopBits, Int32 readTimeout, Int32 writeTimeout, Handshake handshake, Boolean dtrEnable, Boolean rtsEnable, Boolean discardNull, Byte parityReplace) at System.IO.Ports.SerialPort.Open() at HSPI_ZWave.ZWaveAPI.RThreadProc_Serial() Error: Aeon: Cannot open COM port COM3, exiting. Ex=The maximum baud rate for the device is 9598. Parameter name: baudRate Error: Aeon: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Error: Aeon: Cannot open COM port COM3: The maximum baud rate for the device is 9598. Parameter name: baudRate Error: Aeon: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Error opening com port: The maximum baud rate for the device is 9598. Parameter name: baudRate Trace: at System.IO.Ports.SerialStream..ctor(String portName, Int32 baudRate, Parity parity, Int32 dataBits, StopBits stopBits, Int32 readTimeout, Int32 writeTimeout, Handshake handshake, Boolean dtrEnable, Boolean rtsEnable, Boolean discardNull, Byte parityReplace) at System.IO.Ports.SerialPort.Open() at HSPI_ZWave.ZWaveAPI.RThreadProc_Serial() Error: Aeon: Cannot open COM port COM3, exiting. Ex=The maximum baud rate for the device is 9598. Parameter name: baudRate
My goal here is to move a bunch of z-wave sensors off a SmartThings hub. And likely everything else too. But just the sensors to start.
What am I missing? What settings or drivers should I be using?
Comment