Announcement

Collapse
No announcement yet.

IR Commands Not Working

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    IR Commands Not Working

    I have a GC-100-06 and a GC-IRE. I learned my first IR command using the GC iLearn utility and saved the file. I then imported the file using the Ultra GCIR import/upload feature. I then click the 'sendir' icon in the Action column to test the signal. My IR emitters blink, but the associated function does not execute (TV input select, in this case).

    What am I missing?

    Thanks,
    Mike

    #2
    The problem was with a Sony device, and seems to be fixed by increasing the repeat rate (in the GC iLearn utility) when capturing the commands. I increased the repeat rate from 1 to 2 and it seems to be working fine so far.

    Mike

    Comment


      #3
      Mike Johnson

      You found the secret. I have found that repeat rate of 2 is about the minimun. You can change this in the ilearn program or edit the IR command on the GCIR page.

      Comment


        #4
        Thanks for the tip. And for reference, here's the Global Cache format showing where the repeat count is located:

        sendir,*mod-addr*:*conn-addr*,6,40000,*repeatcount*,1,...

        Mike

        Comment

        Working...
        X