Insteon 2420M Motion / Photo Cell

[gjtherk@comcast.net]

Clarification

Just to clarify, the MS has been working reliably since it was last re-linked to the PLM.

[gjtherk@comcast.net]

Detailed Debugging this time. Failed to save earlier

<TABLE border=0 cellSpacing=2 cellPadding=0 width="100%"><TBODY><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:19 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Timed poll for Insteon device ID 07.41.02 Unit code 3, Last contact 1/20/2011 9:07:10 PM. Polling interval of 1 min. reached, polling...</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:19 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Requesting Insteon status (Polling) for device 07.41.02</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:19 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Attempting to update the database delta values for 07.41.02</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:19 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Sending command 02 62 07 41 02 0F 19 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:19 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>..Got RF PLM Response 02 62 07 41 02 0F 19 00 06</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:20 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 07 41 02 13 AE 6E 2B 00 FF - Event: New msg for RF PLM, Src[07.41.02] Dst[13.AE.6E] {Ack/Dir} Cmd1: 00 Cmd2: FF</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:20 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>[CheckDeltas] Database recently heard delta value for device 07.41.02 is current.</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:20 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Database delta value of 0 for device 07.41.02 is current. No changes since last database update.</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:20 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>StandardDeviceClass ProcessStatus called with Level:255</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:20 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Setting status and value for device \3. Old status:2 Old Value:100, New Status:2 New Value:100</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:20 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Timed poll for Insteon device ID 03.89.24 Unit code 16, Last contact 1/20/2011 9:07:11 PM. Polling interval of 1 min. reached, polling...</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:20 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Requesting Insteon status (Polling) for device 03.89.24</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:20 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Attempting to update the database delta values for 03.89.24</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:20 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Sending command 02 62 03 89 24 0F 19 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:20 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>..Got RF PLM Response 02 62 03 89 24 0F 19 00 06</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:20 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 03 89 24 13 AE 6E 2B 01 00 - Event: New msg for RF PLM, Src[03.89.24] Dst[13.AE.6E] {Ack/Dir} Cmd1: 01 Cmd2: 00</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:20 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>[CheckDeltas] Database recently heard delta value for device 03.89.24 is current.</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:20 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Database delta value of 1 for device 03.89.24 is current. No changes since last database update.</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:20 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>StandardDeviceClass ProcessStatus called with Level:0</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:20 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Setting status and value for device \16. Old status:3 Old Value:0, New Status:3 New Value:0</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:20 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Timed poll for Insteon device ID 05.9B.4D Unit code 56, Last contact 1/20/2011 8:58:05 PM. Polling interval of 10 min. reached, polling...</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:20 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Requesting Insteon status (Polling) for device 05.9B.4D</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:20 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Attempting to update the database delta values for 05.9B.4D</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:20 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Sending command 02 62 05 9B 4D 0F 19 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:20 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>..Got RF PLM Response 02 62 05 9B 4D 0F 19 00 06</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:21 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 05 9B 4D 13 AE 6E 2B 00 FF - Event: New msg for RF PLM, Src[05.9B.4D] Dst[13.AE.6E] {Ack/Dir} Cmd1: 00 Cmd2: FF</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:21 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>[CheckDeltas] Database recently heard delta value for device 05.9B.4D is current.</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:21 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Database delta value of 0 for device 05.9B.4D is current. No changes since last database update.</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:21 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>StandardDeviceClass ProcessStatus called with Level:255</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:21 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Setting status and value for device \56. Old status:2 Old Value:100, New Status:2 New Value:100</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:21 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Timed poll for Insteon device ID 09.62.C9 Unit code 57, Last contact 1/20/2011 8:58:05 PM. Polling interval of 10 min. reached, polling...</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:21 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Requesting Insteon status (Polling) for device 09.62.C9</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:21 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Attempting to update the database delta values for 09.62.C9</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:21 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Sending command 02 62 09 62 C9 0F 19 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:21 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>..Got RF PLM Response 02 62 09 62 C9 0F 19 00 06</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:21 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 09 62 C9 13 AE 6E 2B 00 FF - Event: New msg for RF PLM, Src[09.62.C9] Dst[13.AE.6E] {Ack/Dir} Cmd1: 00 Cmd2: FF</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:21 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>[CheckDeltas] Database recently heard delta value for device 09.62.C9 is current.</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:21 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Database delta value of 0 for device 09.62.C9 is current. No changes since last database update.</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:21 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>StandardDeviceClass ProcessStatus called with Level:255</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:21 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Setting status and value for device \57. Old status:2 Old Value:100, New Status:2 New Value:100</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:21 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Timed poll for Insteon device ID 05.A5.62 Unit code 74, Last contact 1/20/2011 8:58:17 PM. Polling interval of 10 min. reached, polling...</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:21 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Requesting Insteon status (Polling) for device 05.A5.62</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:21 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Attempting to update the database delta values for 05.A5.62</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:21 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Sending command 02 62 05 A5 62 0F 19 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:21 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>..Got RF PLM Response 02 62 05 A5 62 0F 19 00 06</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:22 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 05 A5 62 13 AE 6E 2B 01 00 - Event: New msg for RF PLM, Src[05.A5.62] Dst[13.AE.6E] {Ack/Dir} Cmd1: 01 Cmd2: 00</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:22 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>[CheckDeltas] Database recently heard delta value for device 05.A5.62 is current.</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:22 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Database delta value of 1 for device 05.A5.62 is current. No changes since last database update.</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:22 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>StandardDeviceClass ProcessStatus called with Level:0</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:22 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Setting status and value for device \74. Old status:3 Old Value:0, New Status:3 New Value:0</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:22 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Timed poll for Insteon device ID 09.66.AD Unit code 65, Last contact 1/20/2011 9:07:12 PM. Polling interval of 1 min. reached, polling...</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:22 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Requesting Insteon status (Polling) for device 09.66.AD</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:22 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Attempting to update the database delta values for 09.66.AD</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:22 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Sending command 02 62 09 66 AD 0F 19 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:22 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>..Got RF PLM Response 02 62 09 66 AD 0F 19 00 06</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:22 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 09 66 AD 13 AE 6E 2B 00 00 - Event: New msg for RF PLM, Src[09.66.AD] Dst[13.AE.6E] {Ack/Dir} Cmd1: 00 Cmd2: 00</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:22 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>[CheckDeltas] Database recently heard delta value for device 09.66.AD is current.</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:22 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Database delta value of 0 for device 09.66.AD is current. No changes since last database update.</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:22 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>StandardDeviceClass ProcessStatus called with Level:0</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:22 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Setting status and value for device \65. Old status:3 Old Value:0, New Status:3 New Value:0</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:24 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 14 18 69 00 00 01 CB 11 01 - Event: New msg for RF PLM, Src[14.18.69] Dst[--.--.--] {Grp Brdcst} Cmd1: Go ON Cmd2: 01</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:24 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Received _49 (Exterior Motion North 04) Go ON</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:24 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>ProcessGroupBroadcast: Device index 106 14.18.69 is group broadcast source (tgt group/button: 1) sending cmd 11</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:24 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Setting status and value for device _49. Old status:3 Old Value:0, New Status:2 New Value:100</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:25 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>PLM_ProcessInBuffer received STX 0x50 (Raw Insteon Rec): Debouncing repeat.</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:25 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 14 18 69 13 AE 6E 41 11 01 - Event: New msg for RF PLM, Src[14.18.69] Dst[13.AE.6E] {Grp Cln} Cmd1: Go ON Cmd2: 01</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:25 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>PLM_ProcessInBuffer received STX 0x50 (Raw Insteon Rec): Debouncing repeat.</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:33 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 14 18 69 00 00 01 CB 13 01 - Event: New msg for RF PLM, Src[14.18.69] Dst[--.--.--] {Grp Brdcst} Cmd1: Go OFF Cmd2: 01</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:33 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Received _49 (Exterior Motion North 04) Go OFF</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:33 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>ProcessGroupBroadcast: Device index 106 14.18.69 is group broadcast source (tgt group/button: 1) sending cmd 13</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:33 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Setting status and value for device _49. Old status:2 Old Value:100, New Status:3 New Value:0</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:33 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 14 18 69 00 01 01 CB 13 01 - Event: New msg for RF PLM, Src[14.18.69] Dst[--.--.--] {Grp Brdcst} Cmd1: Go OFF Cmd2: 01</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:33 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Received _49 (Exterior Motion North 04) Go OFF</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:33 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>ProcessGroupBroadcast: Device index 106 14.18.69 is group broadcast source (tgt group/button: 1) sending cmd 13</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:33 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Setting status and value for device _49. Old status:3 Old Value:0, New Status:3 New Value:0</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:33 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 14 18 69 13 AE 6E 41 13 01 - Event: New msg for RF PLM, Src[14.18.69] Dst[13.AE.6E] {Grp Cln} Cmd1: Go OFF Cmd2: 01</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:33 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>PLM_ProcessInBuffer received STX 0x50 (Raw Insteon Rec): Debouncing repeat.</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:34 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 14 18 69 00 00 01 CB 11 01 - Event: New msg for RF PLM, Src[14.18.69] Dst[--.--.--] {Grp Brdcst} Cmd1: Go ON Cmd2: 01</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:34 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Received _49 (Exterior Motion North 04) Go ON</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:34 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>ProcessGroupBroadcast: Device index 106 14.18.69 is group broadcast source (tgt group/button: 1) sending cmd 11</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:34 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Setting status and value for device _49. Old status:3 Old Value:0, New Status:2 New Value:100</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:35 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>PLM_ProcessInBuffer received STX 0x50 (Raw Insteon Rec): Debouncing repeat.</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:35 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 14 18 69 13 AE 6E 41 11 01 - Event: New msg for RF PLM, Src[14.18.69] Dst[13.AE.6E] {Grp Cln} Cmd1: Go ON Cmd2: 01</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:35 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>PLM_ProcessInBuffer received STX 0x50 (Raw Insteon Rec): Debouncing repeat.</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:36 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 14 18 69 00 00 01 CB 13 01 - Event: New msg for RF PLM, Src[14.18.69] Dst[--.--.--] {Grp Brdcst} Cmd1: Go OFF Cmd2: 01</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:36 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Received _49 (Exterior Motion North 04) Go OFF</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:36 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>ProcessGroupBroadcast: Device index 106 14.18.69 is group broadcast source (tgt group/button: 1) sending cmd 13</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:36 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Setting status and value for device _49. Old status:2 Old Value:100, New Status:3 New Value:0</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:36 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 14 18 69 00 01 01 CB 13 01 - Event: New msg for RF PLM, Src[14.18.69] Dst[--.--.--] {Grp Brdcst} Cmd1: Go OFF Cmd2: 01</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:36 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Received _49 (Exterior Motion North 04) Go OFF</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:36 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>ProcessGroupBroadcast: Device index 106 14.18.69 is group broadcast source (tgt group/button: 1) sending cmd 13</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:36 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Setting status and value for device _49. Old status:3 Old Value:0, New Status:3 New Value:0</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:37 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 14 18 69 13 AE 6E 41 13 01 - Event: New msg for RF PLM, Src[14.18.69] Dst[13.AE.6E] {Grp Cln} Cmd1: Go OFF Cmd2: 01</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:37 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>PLM_ProcessInBuffer received STX 0x50 (Raw Insteon Rec): Debouncing repeat.</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:37 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Timed poll for Insteon device ID 09.0B.15 Unit code 59, Last contact 1/20/2011 8:58:37 PM. Polling interval of 10 min. reached, polling...</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:37 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Requesting Insteon status (Polling) for device 09.0B.15</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:37 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Attempting to update the database delta values for 09.0B.15</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:37 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Sending command 02 62 09 0B 15 0F 19 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:37 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>..Got RF PLM Response 02 62 09 0B 15 0F 19 00 06</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 09 0B 15 13 AE 6E 2B 01 00 - Event: New msg for RF PLM, Src[09.0B.15] Dst[13.AE.6E] {Ack/Dir} Cmd1: 01 Cmd2: 00</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>[CheckDeltas] Database recently heard delta value for device 09.0B.15 is current.</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Database delta value of 1 for device 09.0B.15 is current. No changes since last database update.</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>StandardDeviceClass ProcessStatus called with Level:0</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Setting status and value for device \59. Old status:3 Old Value:0, New Status:3 New Value:0</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Timed poll for Insteon device ID 09.63.16 Unit code 48, Last contact 1/20/2011 9:07:13 PM. Polling interval of 1 min. reached, polling...</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Requesting Insteon status (Polling) for device 09.63.16</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Attempting to update the database delta values for 09.63.16</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Sending command 02 62 09 63 16 0F 19 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>..Got RF PLM Response 02 62 09 63 16 0F 19 00 06</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 09 63 16 13 AE 6E 2B 00 00 - Event: New msg for RF PLM, Src[09.63.16] Dst[13.AE.6E] {Ack/Dir} Cmd1: 00 Cmd2: 00</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>[CheckDeltas] Database recently heard delta value for device 09.63.16 is current.</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Database delta value of 0 for device 09.63.16 is current. No changes since last database update.</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>StandardDeviceClass ProcessStatus called with Level:0</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Setting status and value for device \48. Old status:3 Old Value:0, New Status:3 New Value:0</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Timed poll for Insteon device ID 0D.44.45 Unit code 30, Last contact 1/20/2011 9:07:30 PM. Polling interval of 1 min. reached, polling...</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Requesting Insteon status (Polling) for device 0D.44.45</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Attempting to update the database delta values for 0D.44.45</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Sending command 02 62 0D 44 45 0F 19 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>..Got RF PLM Response 02 62 0D 44 45 0F 19 00 06</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 14 18 69 00 01 01 CB 11 01 - Event: New msg for RF PLM, Src[14.18.69] Dst[--.--.--] {Grp Brdcst} Cmd1: Go ON Cmd2: 01</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Received _49 (Exterior Motion North 04) Go ON</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>ProcessGroupBroadcast: Device index 106 14.18.69 is group broadcast source (tgt group/button: 1) sending cmd 11</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:38 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Setting status and value for device _49. Old status:3 Old Value:0, New Status:2 New Value:100</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:39 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 14 18 69 13 AE 6E 07 11 01 - Event: New msg for RF PLM, Src[14.18.69] Dst[13.AE.6E] {Direct} Cmd1: Go ON Cmd2: 01</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:39 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 0D 44 45 13 AE 6E 23 00 CC - Event: New msg for RF PLM, Src[0D.44.45] Dst[13.AE.6E] {Ack/Dir} Cmd1: 00 Cmd2: CC</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:39 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>[CheckDeltas] Database recently heard delta value for device 0D.44.45 is current.</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:39 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Database delta value of 0 for device 0D.44.45 is current. No changes since last database update.</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:39 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>StandardDeviceClass ProcessStatus called with Level:204</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:39 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Setting status and value for device _30. Old status:4 Old Value:80, New Status:4 New Value:80</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:39 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Timed poll for Insteon device ID 0E.B3.5A Unit code 41, Last contact 1/20/2011 9:06:21 PM. Polling interval of 2 min. reached, polling...</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:39 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Requesting Insteon status (Polling) for device 0E.B3.5A</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:39 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Attempting to update the database delta values for 0E.B3.5A</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:39 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Sending command 02 62 0E B3 5A 0F 19 00 to RF PLM, (Expecting 0 bytes extra back) Pre-Payload ACK:False, NAK is ok:False</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:39 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>..Got RF PLM Response 02 62 0E B3 5A 0F 19 00 06</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:39 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 0E B3 5A 13 AE 6E 23 00 FF - Event: New msg for RF PLM, Src[0E.B3.5A] Dst[13.AE.6E] {Ack/Dir} Cmd1: 00 Cmd2: FF</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:39 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>[CheckDeltas] Database recently heard delta value for device 0E.B3.5A is current.</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:39 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Database delta value of 0 for device 0E.B3.5A is current. No changes since last database update.</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:39 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>StandardDeviceClass ProcessStatus called with Level:255</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:39 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Setting status and value for device _41. Old status:2 Old Value:100, New Status:2 New Value:100</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:40 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 14 18 69 00 00 01 CB 13 01 - Event: New msg for RF PLM, Src[14.18.69] Dst[--.--.--] {Grp Brdcst} Cmd1: Go OFF Cmd2: 01</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:40 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Received _49 (Exterior Motion North 04) Go OFF</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:40 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>ProcessGroupBroadcast: Device index 106 14.18.69 is group broadcast source (tgt group/button: 1) sending cmd 13</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:40 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Setting status and value for device _49. Old status:2 Old Value:100, New Status:3 New Value:0</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:40 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 14 18 69 00 01 01 CB 13 01 - Event: New msg for RF PLM, Src[14.18.69] Dst[--.--.--] {Grp Brdcst} Cmd1: Go OFF Cmd2: 01</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:40 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Received _49 (Exterior Motion North 04) Go OFF</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:40 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>ProcessGroupBroadcast: Device index 106 14.18.69 is group broadcast source (tgt group/button: 1) sending cmd 13</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:40 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>Setting status and value for device _49. Old status:3 Old Value:0, New Status:3 New Value:0</TD></TR><TR><TD class=LOGDateTime1 noWrap align=left>1/20/2011 9:08:40 PM </TD><TD class=LOGType1 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry1 colSpan=8 align=left>Received STX 0x50 (Raw Insteon Rec):01 14 18 69 13 AE 6E 41 13 01 - Event: New msg for RF PLM, Src[14.18.69] Dst[13.AE.6E] {Grp Cln} Cmd1: Go OFF Cmd2: 01</TD></TR><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 9:08:41 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>PLM_ProcessInBuffer received STX 0x50 (Raw Insteon Rec): Debouncing repeat.</TD></TR></TBODY></TABLE>
<INPUT class=functionrowbutton onmouseover="this.className='functionrowbuttonselected';" onmouseout="this.className='functionrowbutton';" onclick="location.href='/elog'" value=Update type=button>
<HR>Home | Events | Status

[mnsandler]

Just to clarify, the MS has been working reliably since it was last re-linked to the PLM.

so the problem may be the link in the plm from the ms is getting lost and thus hs is not getting notified of changes.

what plm model are you using, and what firmware. fw ver can you seen during hs/plugin startup

[gjtherk@comcast.net]

PLM Info

<TABLE border=0 cellSpacing=2 cellPadding=0 width="100%"><TBODY><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 10:03:44 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>RF PLM contacted on COM6 with an Insteon address of 13.AE.6E and firmware version 92</TD></TR></TBODY></TABLE>

[joegr]

This may or may not be similar to the OP's issue.

I use a dual-band USB PLM. On the first one that I used it ran for months, then one day it stopped receiving (or so I thought). I could still control everything from HS. After some investigation, I found that it was receiving, it just didn't think the messages were for it. Apparently, it lost all it's link memory. I fixed it with the program PLM button (or whatever it is).

After the third time this happened, I switched to another PLM of the same model. So far, this new PLM hasn't lost its links, but it does sometimes lose the connection to the PC. The other PLM never did that.

[mnsandler]

This may or may not be similar to the OP's issue.

I use a dual-band USB PLM. On the first one that I used it ran for months, then one day it stopped receiving (or so I thought). I could still control everything from HS. After some investigation, I found that it was receiving, it just didn't think the messages were for it. Apparently, it lost all it's link memory. I fixed it with the program PLM button (or whatever it is).

After the third time this happened, I switched to another PLM of the same model. So far, this new PLM hasn't lost its links, but it does sometimes lose the connection to the PC. The other PLM never did that.

joe, do you remember the firmware version of the old plm vs the new one? i do think there have been issues with old PLMs "losing their memory" but i don't know for sure. i would have to check the sh beta forum.

reprogramming the plm database is a good idea. this can actually be schedule now as there is an action to do this.

i've thought about adding a feature to allow the user to see all the links in the plm memory, but i don't know what good this will do unless the user saves a copy and compares it later when problems arise. I don't think i want ot get into having the plugins saving this data.

[joegr]

joe, do you remember the firmware version of the old plm vs the new one? ...

No, but I still have the old one. I did order it when the dual one's first came out. Is there an easy way to get the version without disturbing the HS setup?

I'll check the version of the new one tonight.

[mnsandler]

No, but I still have the old one. I did order it when the dual one's first came out. Is there an easy way to get the version without disturbing the HS setup?

I'll check the version of the new one tonight.

if you have an old log it will be in there. otherwise there is a free app call Docklight that you can send the following hex sequence (02 60) to the plm and the response will include the firmware version

[mnsandler]

<TABLE border=0 cellSpacing=2 cellPadding=0 width="100%"><TBODY><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 10:03:44 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>RF PLM contacted on COM6 with an Insteon address of 13.AE.6E and firmware version 92</TD></TR></TBODY></TABLE>

I'll ask my SH contact if there are any known issues with fw 92

[mnsandler]

<TABLE border=0 cellSpacing=2 cellPadding=0 width="100%"><TBODY><TR><TD class=LOGDateTime0 noWrap align=left>1/20/2011 10:03:44 PM </TD><TD class=LOGType0 colSpan=3 align=left>Insteon </TD><TD class=LOGEntry0 colSpan=8 align=left>RF PLM contacted on COM6 with an Insteon address of 13.AE.6E and firmware version 92</TD></TR></TBODY></TABLE>

is the plm a 2413u or 2413s (usb or serial)?

[joegr]

if you have an old log it will be in there. otherwise there is a free app call Docklight that you can send the following hex sequence (02 60) to the plm and the response will include the firmware version

From an old log, here is the old PLM version.
8/22/2010 3:50:18 PM ~!~Insteon~!~RF PLM contacted on COM3 with an Insteon address of 13.AC.16 and firmware version 92

From a newer log, here is the new PLM version.
12/15/2010 3:18:21 AM ~!~Insteon~!~RF PLM contacted on COM6 with an Insteon address of 13.24.43 and firmware version 92

So, apparently the same there.